63OthersLOW BATTERY:The Battery is low. Recharge it. (pp. 15~16)NO TAPE:No tape is inserted. (p. 17)CHECK REMOTE MODE:An incorrect Remote Control Mode hasbeen selected. This is only displayed at thefirst operation of the Remote Control afterpowering-on. (p. 15)CHECK REC TAB:You are attempting to record pictures on a tapewith the accidental erasure prevention sliderplaced in the [SAVE] position.You are attempting Audio Dubbing or DigitalDubbing on a tape with the accidental erasureprevention slider placed in the [SAVE] position.WRONG TAPE FORMAT:You are attempting to play back a tape sectionthat has been recorded with a different TVsystem. This cassette is incompatible.UNABLE TO A.DUB(LP RECORDED):Because the original recording was in LP Mode,audio dubbing cannot be performed.UNABLE TO A.DUB:You are attempting to perform audio dubbing on anon-recorded tape.COPY PROTECTED:Images cannot be recorded correctly because themedium is protected by a copy guard.CARD ERROR:The Card is not compatible with this Camcorder.You are attempting to format a failed card.It displays, when you attempt to insert theincompatible card to Card Slot.NO CARD:No card is inserted.CARD FULL:Card does not have sufficient memory remaining.Select Picture Playback Mode and deleteunnecessary files.NO DATA:There are no recorded files on the card.UNPLAYABLE CARD:You are attempting to play back data notcompatible with this Camcorder.FILE LOCKED:You are attempting to erase protected files.CARD LOCKED:The write protection switch on the SD MemoryCard is set to [LOCK].CHANGE MODE TO USE USB:The USB Cable is connected to the Camcorder inCard Recording Mode.CANCEL NIGHT VIEW MODE:You are attempting to select an item other than[OFF] in [ SCENE MODE] during MagicPixMode.DISCONNECT USB CABLE:You are attempting to turn the Mode Dial in PCMode with the USB Cable connected to theCamcorder.You are attempting to record pictures on aTape/Card with the USB Cable connected to theCamcorder.PC DOES NOT SUPPORT USB2.0:The Camcorder is connected to a personalcomputer that does not support USB2.0.CAN NOT USE USB:You are connecting the USB Cable with the DVCable connected in MotionDV Mode.CHANGE TO MANUAL MODE:You are attempting to select an item other than[OFF] in [ SCENE MODE] when the [AUTO/MANUAL/FOCUS] Switch is set to [AUTO].CAN NOT OPERATE(MOTION DV MODE) (PV-GS35 Only):You are attempting to change [ D.ZOOM]setting during MotionDV Mode.TURN OFF THE VIDEO LIGHT:You are attempting to select an item in [SCENE MODE] when Light is on.Notes and Hints Concerning the Power Supply• When the Camcorder has been used for a long time,the Camera body becomes warm, but this is not amalfunction.• If the [CHARGE] Lamp does not light up althoughthe Battery is attached to the AC Adaptor, detach theBattery and reattach it. Inserting/Removing the Cassette• When inserting a previously recorded Cassette,use the Blank Search Function (p. 27) to find theposition where you want to continue recording. If youoverwrite-record on a previously recorded cassette,be sure to find the position where you want tocontinue recording.• If a new Cassette is inserted, rewind to the beginningof the tape before starting recording.• When inserting the cassette, make sure it faces inthe right direction and then push it in until it stops.• When the Cassette Holder is in action, do not touchanything except the [PUSH] mark.• Close the Cassette Compartment Cover tightly.• When closing the Cassette Compartment Cover,do not get anything, such as a cable, caught in thecover.