70Connecting Computer and PalmcorderInstall USB Driver before connecting.Never connect the USB Connecting Cable until the USB Driveris installed.Before making these connections, turn off all devices which are tobe connected.1 Install the supplied USB Driver.2 Insert memory card into Palmcorder, then set cardplayback mode.3 Use auxiliary USB Connection Cable to connect.≥PC connecting mode.1) Palmcorder2) USB Connection Cable3) USB terminal4) Personal computer (not supplied)≥After making the connections, turn the connected equipment on.≥Appropriate driver to recognize Palmcorder is automaticallyinstalled by Windows Plug’n Play when connected for the first time.≥When using the USB Connection Kit, it is recommended that youuse the AC Adaptor as the power supply of the Palmcorder.≥After the USB Driver is installed and USB Connection Cable isconnected to the Palmcorder, open [My computer] or[Windows Explorer] to check that the drive is displayed as aremovable disk drive (only when card is inserted into thePalmcorder). It enables you to operate in the same way as a floppydisk drive, and you can use the same drag and drop or copymethods.ª For Windows XP/2000 UsersWhen the Palmcorder is connected for the first time in both the CardPlayback Mode and the VCR/Camera Mode, the “Found NewHardware Wizard” is displayed. (If there are two or more USBterminals and you pull out and reconnect the USB cable toanother terminal, this display appears.)1 Click [Next].2 Click [Continue Anyway].≥Testing by the manufacturer has confirmed functionality of thisPalmcorder.≥If the [Insert disc] screen is displayed, click [OK].3 After the completion of setting, click on [Finish].1)2)4)1, 323)123
