74Using the DV STUDIO 3.1E-SEª Operating environmentOS:IBM-PC/AT compatible personal computer with pre-installed;Microsoft Windows XP Home Edition/ProfessionalMicrosoft Windows Me (Millennium Edition)Microsoft Windows 98 Second EditionCPU:Intel Pentium II/Celeron 300MHz or higher (including compatibleCPU)Graphic display:High Color (16 bit) or moreDesktop resolution of 800k600 dots or moreRAM:32 MB or more (64 MB or more is recommended)(128 MB or more are required for Windows XP.)Free hard disk space:At least 20 MBPorts:USB TerminalOther requirements:Mouse≥Operation is not guaranteed on Windows 2000.≥When 2 or more USB devices are connected to a personalcomputer, or when devices are connected through USB hubs or byusing extension cables, proper operation is not guaranteed.≥When connected to the keyboard USB terminal, normal functionmay not be possible.≥This instruction manual describes only the procedures forinstallation, connection and start-up. Please read the PDF-basedinstructions for how to use the DV STUDIO 3.1E-SE.≥To view the installed operating instructions, Adobe Acrobat Reader4.0 or later is required. Please install Adobe Acrobat Reader 5.0from the supplied CD-ROM.≥Before using for the first time, select [Readme] from [Start] >>[All programs (Programs)] >> [Panasonic] >> [DV STUDIO3], andread any supplementary details or updates.ª Installation of DV STUDIO 3.1E-SE1 Insert the supplied CD-ROM into the personalcomputer’s CD-ROM drive.2 Select the software to be installed from[Setup Menu].3 Click [Next].≥After reading the displayed contents, please carry out theinstallation according to instructions.4 After the completion of setup, click on [Finish]≥Installation will be completed.≥Sample data is installed concurrently with the DV STUDIO3.1E-SE software.234