Panasonic Palmcorder IQ PV-D326 Operating Instructions Manual

Contents

Attach an optical filter or lens.• Be careful not to touch the lens itself.PV-D326To Remove (_ Turn the EVF Eyepiececounterclockwise 1/8 of a turn._-2 Pullfree.Remove any lintor dust particles with asoftclean clothbeing careful notto scratchthe glass surfaces.To re-install EVFPV-D426To RemoveGev ew,-!Line up the marks on the Eyepiece withthe grooves inside the EVF shaft andattach. Turn the EVF clockwise 1/8 of aturn to lock in place.Slide and hold the EYEPIECERELEASE button.Remove the eyepiece. (Do not twist.)QqLD Remove any lint or dust particles with ablower, available at photographystores. Do not touch lenses withfingers. Now, replace the eyepiece.FCC Warning: Any unauthorized changes or modifications to this equipment wouldvoid the user's authority to operate. JThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-ditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Note; This equipment has been tested and found to comply with Part 15 and part 18 of the FCCRules. These limits are designed to provide reasonable protection against harmful interferencewhen operated in a residential environment.If this equipment does cause interference to radio or television reception, which can be determinedby turning the equipment off and on, use the equipment in another location and/or utilize an electri-cal outlet different from that used by the receiver.If necessary, consult the dealer or an experienced radio/TV technician for help. You may find thebooklet, 'Something About Interference' available from FCC local regional offices helpful.36