Panasonic Palmcorder IQ PV-D326 Operating Instructions Manual

Contents

This feature completely discharges the Battery beto_e recharging begins.To maintain your battery's operating capacity, use the refresh feature after about every five charges.CHARGE LampPlug in AC Adaptor.Place the Battery intothe AC Adaptor.Press the BATTERY REFRESHbutton.The CHARGE Lamp will flash whendischarging begins and stop flashingwhen fully discharged. POWER Lampwill stay ht when fully charged.Remove the Battery• Should you accidentally press the BATTERYREFRESH button, remove Battery and thenre-insert it to begin charging.• It takes about seven and a half hours whenboth Battery Refresh and charging areONLY FOR U.S.A. performed.!,_._ ATTENTION: iThe product that you have purchased is powered by a rechargeable battery. The battery /is recyclable. At the end of its useful life, under various state and local laws, it may be /illegal to dispose of this battery into the municipal waste stream. Check with your local /solid waste officials for details in your area for recycling options or proper disposal. _)Caution:• Charge only with specified charger.• The Battery can be charged within a tempera-ture range of 32 ° F (0 ° C) and 104 ° F (40 ° C).• The Battery may be warm after charging orjust after use. This is normal.• Do not use an insufficiently charged or wornout Battery.Safety precautions:• Do not get the Battery near, or dispose of infi re.• Do not directly connect (short circuit) thepositive (,+) and negative (-) terminals.• Never attempt to disassemble or reassemblethe Battery.8To avoid damage to the Battery:• Do not drop or jar the Battery.• Use the Battery with specified units only.• If the Battery is used in extremely hightemperatures, a safety device will automati-cally prevent operation.To insure longer battery life:• While not in use, remove Battery from thePalmcorder and AC Adaptor and store in acool, dark, dry place.• Keep the Battery terminals clean.