Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual

Also see for Palmcorder MultiCam PV-DC352-K: User guide

Contents

Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual Manual pdf 23 page image

2325tW TD.ZOOM1 2PUSHW.B./SHUTTER/IRIS/MF/VOL/JOGMENUEIS 11PUSHW.B./SHUTTER/IRIS/MF/VOL/JOGM ENU1 21, 32FADEOFFON MODEDigital Zoom FunctionThis function is useful when you want to record close-up shots of subjectslocated beyond a normal zoom range of 1t to 10t magnification. With theDigital Zoom Function, you can select a magnification of 25t or 700t.1 Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>[D.ZOOM] >> [25tttt] or [700tttt].≥25k: Digital zooming to 25t≥700k: Digital zooming to 700t2 To zoom in or out, press the [W/T] zoom lever towards [T] ortowards [W].Canceling the Digital Zoom FunctionSet [D.ZOOM] on the [CAMERA SETUP] Sub-menu to [OFF].≥For other notes, see page 61.~~~~~~~~~~~~~~~~~~~~~~~~~Digital Electronic Image Stabilizer FunctionIf you are recording in unstable situations and the Palmcorder is shaky, youcan use this function to correct for camera shake for these images.≥If the Palmcorder shakes too much, this function may not be able tostabilize images.1 Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [EIS] >>[ON].≥The [EIS] Indication 1 appears.Canceling Digital Electronic Image StabilizerSet [EIS] on the [CAMERA SETUP] Sub-Menu to [OFF].EIS function may not work when...≥Palmcorder movement is too extreme.≥Recording a subject with distinct horizontal or vertical stripes.≥Recording in low light situations.≥Recording a subject under a great amount of fluorescent light.≥Recording a scene with very fast movement.≥For other notes, see page 62.~~~~~~~~~~~~~~~~~~~~~~~~~Fade In/Out FunctionsFade In 1Fade In brings out images and sounds gradually from a black screen at thebeginning of a scene.1 Hold down the [FADE] Button while the Palmcorder is set tothe Recording Pause Mode.≥The image fades out gradually.2 When the image is completely gone, press the RecordingStart/Stop Button to start recording.3 Release the [FADE] Button about 3 seconds after startingrecording.≥The image reappears gradually.Fade Out 2Fade Out causes images and sounds to disappear gradually, leaving a blackscreen at the end of a scene.1 Hold down the [FADE] Button while recording.≥The image fades out gradually.2 About 3 seconds after the image is completely gone, pressthe recording Start/Stop Button to stop recording.3 Release the [FADE] Button.≥For other notes, see page 62.