Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual

Also see for Palmcorder MultiCam PV-DC352-K: User guide

Contents

Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual Manual pdf 33 page image

33Index Search FunctionsTo facilitate searching of desired scene, this Palmcorder automaticallyrecords index signals during recording, as explained in the following.PhotoShot Index SignalThese signals are automatically recorded whenever still pictures are taken inPhotoShot Mode (l 22).When recording still pictures using the Continuous PhotoShot Mode (l 22),the index signal is not recorded.Scene Index SignalScene Index Signals are automatically recorded when you start recordingafter inserting a Cassette.However, if the Palmcorder is switched from the VCR Mode to Camera Mode,or if the date and time is set before the start of recording, the index signal isnot recorded.≥If [INDEX] of [RECORDING SETUP] Sub-Menu on the[CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index signal isrecorded when Recording is restarted after a lapse of 2 hours or longer. If itis set to [DAY], an index signal is recorded when recording is restarted afterthe date has changed since the last recording. (While the index signal isrecorded, the [INDEX] indication A flashes for a few seconds.)ª PhotoShot Index Search1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>[INDEX] >> [PHOTO].2 Press the [9] Button or the [:] Button on the RemoteController.≥With each press of the corresponding button, still pictures recorded inPhotoShot Mode are searched.≥After pictures with sounds are played back for 4 seconds, the Palmcorderswitches to the Still Playback Mode.ª Scene Index Search1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>[INDEX] >> [SCENE].2 Press the [9] Button or the [:] Button on the RemoteController.≥When the corresponding button is pressed once, the [S 1] Indication Bappears, and searching of the subsequent scene marked with an indexsignal starts. Each time the button is pressed after the start of Scene IndexSearch, the indication changes from [S 2] to [S 9], and the beginning of thescene corresponding to the selected number will be searched. Afterreaching the desired scene, playback starts automatically.≥Up to 9 scene numbers can be selected.Top ScanIf the [9] Button or the [:] Button is pressed for more than 2 seconds,the Palmcorder will scan for scenes (or PhotoShots) and play back the firstfew seconds of each. (To cancel, press the [1] Button 1 or the [∫] Button2.)≥For other notes, see page 64.INDEXS 1ABZOOMINDEX INDEXSELECTSTORESTOPK L∫OSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM1221PUSHW.B./SHUTTER/IRIS/MF/VOL/JOGMENU