53With a PC• For other information about MSN Messenger, pleaserefer to Help.• If the Camcorder is used as a Web Cameracontinuously for two hours, the communication isautomatically shut OFF. In this case, restart MSNMessenger and set up the communication again.• When access is fi nished, close MSN Messenger,then turn off the Camcorder. Finally, disconnect theUSB Cable.2 Type in your Sign-in name and password.• If you do not have your Sign-in name andpassword, click [Get one here].3 Please carefully read the displayed contentsand then proceed.4 After the setup is completed, sign in and startthe MSN Messenger.7 Click [Web Camera Settings...] in the [Tools]menu.8 Confirm the [Panasonic DVC Web CameraDevice] 1 is selected.6 Select [USB Audio Device] in the [Microphone]menu.15 Click on [Audio Tuning Wizard...] in the [Tools]menu to confirm that equipment is connectedcorrectly.Using the DV STUDIO 3.1E-SE (OptionalSoftware)Following Software is not supplied with the Camcorder;• LSFT0577 (DV STUDIO 3.1E-SE)• K1HA05CD0005 (USB Cable)The Software allows you to capture a still image fromyour motion video on the tape and transfer to a PC. Ifyou would like to order, please refer to page 74.Operating environmentOS:IBM PC/AT compatible personal computer withpreinstalled;Microsoft Windows XP Home Edition/ProfessionalMicrosoft Windows Me (Millennium Edition)Microsoft Windows 98 Second EditionCPU:Intel Pentium II/Celeron 300 MHz or higher(including compatible CPU)Graphic display:High Color (16 bit or more)Desktop resolution of 800 x 600 pixels or moreRAM:32 MB or more (64 MB or more recommended)(128 MB or more required for Windows XP (256 MB ormore recommended))Free hard disk space:At least 20 MBPorts:USB JackOther requirements:Mouse