Panasonic Palmcorder MultiCam PV-GS9 Operating Instructions Manual

Contents

Panasonic Palmcorder MultiCam PV-GS9 Operating Instructions Manual Manual pdf 60 page image

60OthersFor assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfoGAINUP: Gain up Mode (p. 26)(White): DPOF Setting completed (set to 1 ormore picture) (p. 41)640 : [640 x 480] Image size• For images not recorded with this Camcorder, thesize display is determined as follows according tothe number of horizontal pixels.640 : 640 or more, less than 800 (The sizeis not displayed at under 640 pixels.)SVGA : 800 or more, less than 1 024XGA : 1 024 or more, less than 1 280SXGA : 1 280 or more, less than 1 600UXGA : 1 600 or more, less than 2048QXGA : 2 048 or morePICTURE (Cyan): Photoshot ModePICTURE (Red): While Photoshot recording isactivatedPICTURE (Green): While the Card being readPICTURE (Red): No Card (Still Picture Mode)To Change the Counter Display ModeBy changing [C.DISPLAY] on the [DISPLAY]Sub-Menu, you can change the Counter Display Modeto Tape Counter Indication [COUNTER] (0:00.00),Memory Counter Indication [MEMORY] (M0:00.00),and Time Code Indication [TIMECODE] (0h00m00s00f).(p. 21) By repeatedly pressing the [DISPLAY] Buttonon the Remote Control, you can change the CounterDisplay Mode.To Display Date/Time IndicationTo display Date/Time Indication, set the appropriateDate/Time in [DATE/TIME] on the [DISPLAY]Sub-Menu. (p. 21)You can also press the [DATE/TIME] Button of theRemote Control repeatedly to display or change theDate/Time Indication.To Change the Display ModeBy changing [DISPLAY] on the [DISPLAY] Sub-Menu,you can change the Display Mode to All FunctionDisplay [ALL] and Minimum Display [OFF]. (p. 21)Progressive PhotoshotYou cannot use the Progressive Photoshot Function inthe following cases.When using Tape Recording Mode• Digital Effect Modes in [EFFECT1]• Digital Zoom [D.ZOOM]• 1/750 s or faster shutter speed• When brightness is insuffi cient• When the MagicPix Function is ON• When the Portrait is usedWhen using Card Recording Mode• When brightness is insuffi cient• When the MagicPix Function is ONInitializing the ModesYou can change the Menu settings back to theshipping condition.1 Set [INITIAL] >> [INITIAL SET] >> [YES].• The initializing takes a little while.• After the initializing is completed, the [COMPLETED]Indication appears with beeps.• Initializing will not erase a clock setting (p. 23) thathas been adjusted.Warning/Alarm IndicationsIf any one of the following indications lights up orfl ashes, please check the condition of the Camcorder.DEW (DEW DETECTED/EJECT TAPE):Condensation has occurred. (pp. 66-67)(CHECK REC TAB):The accidental erasure prevention slider on theinserted Cassette is open (that is, set to [SAVE]).You are attempting Audio dubbing or Digitaldubbing on a Tape while setting the accidentalerasure prevention slider to [SAVE].(TAPE NOT INSERTED):No Cassette in inserted. (p. 17)(LOW BATTERY):The Battery is low. Recharge it. (p. 15):The built-in battery is low. (p. 23)(NEED HEAD CLEANING):The video heads are dirty. (p. 67)END (TAPE END):The tape came to an end during recording.REMOTE (CHECK REMOTE MODE):Wrong Remote Control Mode has been selected.(p. 15)UNPLAYABLE TAPE(OTHER FORMAT):You are attempting to play back a tape sectionthat has been recorded with a different TV system.UNABLE TO A.DUB(LP RECORDED):Because the original recording was done in LPMode, audio dubbing cannot be performed.INCOMPATIBLE TAPE:This cassette is incompatible.PUSH THE RESET SWITCH:Irregular mechanism is detected. Press the[RESET] Button (p. 70). This may solve theproblem.CARD FULL:Card does not have sufficient memory remaining.Select Picture Playback Mode and deleteunnecessary fi les.