Panasonic Palmcorder Multicam PV-GS34PKG Operating Instructions Manual

Contents

Panasonic Palmcorder Multicam PV-GS34PKG Operating Instructions Manual Manual pdf 36 page image

36Playback ModeFor assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo• For other notes concerning this item, see page 55.• The SD Memory Card has a write protection switch.(p. 55)3 Repeat Step 2 and press the [MENU] Button28 when the setup is completed.Formatting a CardIf a Card becomes unreadable by the Camcorder,format it for reuse. Formatting erases all the datarecorded on a Card.• When formatting the card all protected files(lock) are also deleted.• Set to Picture Playback Mode.• The One-Touch Navigation icon is displayed on thelower right of the screen.1 Set [ ADVANCE] >> [ CARD FORMAT]>> [YES].• A confirmation message appears, select [YES]and formatting will be carried out.33CARD FORMATNOYESDELETES ALL DATASETUP ENTER EXIT28• When the formatting is completed, the screenbecomes white.• It may not be possible to use a Card formatted bythis Camcorder on another unit. In this case, formatthe Card on the unit which will use the Card. Makesure that valuable pictures are stored on your PCbefore proceeding.• Normally, it is not necessary to format the card. Ifa message appears even though you insert andremove the card several times, format it.• If the SD Memory Card is formatted on otherequipment, the time spent for recording may becomelonger.If the SD Memory Card is formatted on a PC, itcannot be used on the Camcorder.Format the SD Memory Card on the Camcorder, inthis case.• The Camcorder supports SD Memory Cardsformatted in FAT12 system and FAT16 systembased on SD Memory Card Specifications.A/VPlaying Back on Your TVBy connecting your Camcorder with your TV, therecorded scenes can be viewed on your TV screen.• Before connecting them, turn off the power of boththe Camcorder and TV.1 Insert a recorded tape into this Camcorder.2 Connect the [AV OUT] Jack of theCamcorder and the Video and Audio InputJacks of the TV.• Connect to the TV with the AV Cable 1 .• When plugging the pin plug of the AV cable intothe [AV OUT] Jack, plug it in as far as it goes.[VIDEO IN][AUDIO IN]13 Turn on this Camcorder and set the ModeDial 32 to the Tape Playback Mode.4 Select the input channel on the TV.5 Move the Joystick Control [▲]33 to select the [ ] to startplayback.• The image and audio are outputon the TV.6 Move the Joystick Control [▼] 33 to selectthe [ ] to stop playback. If the image or audio from thisCamcorder is not output on the TV• Check that the plugs are inserted as far as theygo.• Check the connected terminal.• Check the TV’s input setting (input switch). (Formore information, please read the operatinginstructions for the TV.)• For other notes concerning this item, see page 55.