Panasonic Palmcorder PV-GS120 Operating Instructions Manual

Also see for Palmcorder PV-GS120: Operating instructions Operating instructions

Contents

Panasonic Palmcorder PV-GS120 Operating Instructions Manual Manual pdf 51 page image

Editing Mode-51-Editing ModeRecording from a Tape onto a CardStill pictures or moving pictures can be recordedon a Memory Card from scenes that have alreadybeen recorded on a cassette. (moving pictures onPV-GS200 Model only)1 Set the Mode Dial (39) to Tape PlaybackMode.2 Still Picture:Start playback and set the Camcorder toStill Playback Mode at the scene you wishto record, and press the [PHOTO SHOT]Button (47).Moving Picture (PV-GS200 only):Start playback and press the RecordingStart/Stop Button (42) at the desired scene.Recording Pictures from a Card ontoa TapeCard Images can be recorded to a Tape.1 Set the Mode Dial (39) to Picture PlaybackMode.2 Display the first picture.3 Press the [PHOTO SHOT] Button (47).PCSD(39)PHOTOSHOT(47)(42)PCSD(39)PHOTOSHOT(47)≥During the copying, the following Indicationappears.≥It takes a few seconds to record a picture tothe Tape.≥When recording to tape, select the tape positionbefore recording. The picture will be recorded tothe tape position when the [PHOTO SHOT]Button is pressed at Step 3.≥Photoshot index signals are automaticallyrecorded.≥Moving pictures (MPEG) can be recorded froma card to a tape on the PV-GS200 model only.≥For other notes concerning this item, see -77-.Audio DubbingYou can add music or narration to the recordedCassette.≥If a tape recorded in the [16bit] Mode is dubbedwith the Audio Dubbing function, the originalsound is erased. (If you wish to preserve theoriginal sound, use the [12bit] Mode whenrecording.)≥Audio Dubbing cannot be performed on arecording made in LP Mode. (-26-)1 Set [TAPE PLAYBACK MENU] >>[AV IN/OUT] >> [AV JACK] >> [IN/OUT].2 Next, select [A.DUB INPUT] >> [MIC] or[AV IN].≥Set to [AV IN] when an external device isused, and to [MIC] when an external orbuilt-in microphone is used.3 Press the [;] Button (76) on the RemoteController where you want to add newsound.4 Press the [A.DUB] Button (62) on theRemote Controller.NOW RECORDINGSTILLENTERFADEMENUis(14)INDEX INDEXSELECTSTOPK L∫V/REWSTILL ADVTWsVOLr¥RECMULTI/P-IN-P A.DUBPLAYPAUSEFF/WSTILL ADV6 1 5;E DP.B. ZOOM(62)(76)