Reoordin_ ModeOutside of the effective range of Automatic WhiteBalance Adjustment, the image will becomereddrsh or bluish. Even wrthin the effective rangeof Automatic White Balance Adjustment, theAutomatic White Balance Adjustment may notfunction properly if there is mere than one lightsource. In this case, adjust the White Balance.1) The effective range of Autom;.ttic WhiteBalance Adjustment on this Camcerder2) Blue sky3) Cloudy sky (rain)4) "IV screen5) Sunlight6) White fluorescent lamp7) Halogen light bulb8) Incandescent light bulb9) Sunrfso or sunset10) Candlelight• For other notes concerning this item, see -74-.• About the Cad Slow Shutter(PV*GS200 only)When you adjast the shutter speed 1o 1/4, 1/8 or1/15 in Card Recording Mode, the Card SlewShutter Mode iS activated.eThe Slew Shutter Mode is cancelled and theshutter speed is set to Ii30 when the JeFF!ON lSwitch or the Mode Dial is operated.In the Slew Shutter Mode:ethe White Balance cannot be changed.ethe Camcerder focuses on the subjectmanually.•When you set the [AUTO/MANUAL/FOCUS]Switch 1o [FOCUS j, the shutter speed isautomatically set to 1/60 and then turned to theprevious shutter speed. [MFj blinks while thesubject is focused.iiiiiiiiiiii(Manual Shutter Speed Adjustment • For ether notes concerning this item, see -74-.Useful for recording fast-moving subjects,1 Set the [AUTO/MANUAL/FOCUS] Switchto [MANUAL].wThe IMNL] Indication appear&2 Press the [ENTER] Button @ until theShutter Speed Indication appears.3 Press the [b,IP] Button _ or [<1_1] Buttonto adjust the shutter speed.Range of Shutter Speed Adjustment1/60 1/8000 s in Tape Recording Mode1/4 1/500 s in Card Recording Mode(PV-GS200)1/30 1/500 s in Card Recording Mode(PV-GS120)The standard shutter speed is 1/60 s.Selecting a speed closer to [1/8000] causes theshutter speed to be f_ster.TO Resume Automatic AdjustmentSet the LAUTOiMANUAL!FOCUSI Switch to[AUTO I.Manual Iris Adjustment(F Number)You can use this function when the screen istoebright or too dark,1 Set the [AUTOtMANUAL/FOCUS] Switchto [MANUAL],• The IMNL] Indication appears.2 Press the [ENTER] Button @ until the IrisIndication appears.3 Press the [1_1_] Button _ or [<1_1] Button@ to adjust the iris.Range of Iris AdjustmentCLOSE (Closed), F16, ..., F2.0,OPEN {Opened) 0dB, ..., 18dBWhen a value closer to [CLOSEI is selected, theimage becomes darker.When a value closer 1o [18dB 1 is selected, theimage becomes bdghter.The value to which dB is attached indicates aGain-up value. If this value is toe large, the qualityOf the image deterforates.-3;-