17Before Using• “1 h 40 min.” indicates 1 hour and 40 minutes.• Battery CGR-DU06 (PV-GS29/PV-GS39/PV-GS59U.S.A.) or CGA-DU12 (PV-GS59 Canada) issupplied.• The times shown in the table are approximatetimes. The numbers indicate the recording timewhen the Viewfinder is used. The numbers inparentheses indicate the recording time when theLCD Monitor is used. In actual use, the availablerecording time may be shorter.• The times shown in the table are for continuousrecording at a temperature of 25 °C (77 °F) andhumidity of 60 %. If the Battery is charged at ahigher or lower temperature, the charging time maybe longer.• We recommend the Battery Pack CGA-DU12 andCGA-DU21 for long time recording (2 hours ormore for continuous recording, 1 hour or more forintermittent recording.)• The available recording time becomes shorterif you use both of Viewfinder and LCD Monitorsimultaneously when rotating the LCD Monitorforward to record yourself.• The batteries heat up after use or charging. TheCamcorder being used will also heat up. This isnormal.• Along with the reduction of the battery capacity,the display will change: → → →→ . If the battery discharges, then( ) will flash.Re-attaching the Lens CapTo protect the Lens surface, attach the Lens Cap.• The Lens Cap and Lens Cap Cord comepreattached to the Grip Belt.1 Pass one end of the Lens Cap Cordthrough the attached eye on the Lens Cap.Then pass the Lens Cap through the loopmade by itself and pull tight.To Use as a Grip BeltAdjust the length of the Grip Belt to the size of yourhand.1 Detach the end of the Grip Belt.2 Adjust the length of the Grip Belt to thesize of your hand.3 Reattach the Grip Belt.How to remove the Sensor tag(For U.S.A. customers)1 Detach the end of the Grip Belt.2 Remove the Sensor tag. Then, replace theGrip Belt.
