Others71Warning/Alarm IndicationsIf any one of the following indications lights up orflashes, please check the Camcorder.Confirmatory Indications: A cassette with the accidental erasureprevention slider placed in the [SAVE]position is inserted.No cassette is inserted.[--] / : The built-in battery is low. (p. 21): The Warning/Alarm Indication appearswhen you record yourself. Turn the LCDMonitor towards the Viewfinder andcheck the Warning/Alarm Indication.: No card is inserted.REMOTE: An incorrect Remote Control mode hasbeen selected. (p. 15)END : The tape came to the end duringrecording.: The video heads are dirty. (p. 73)Textual IndicationsDEW DETECT/ EJECT TAPE:Condensation has occurred. Take out thecassette and wait for a while. It takes some timeuntil the cassette holder opens, but this is not amalfunction. (p. 73)TAPE END:The tape came to the end during recording.NEED HEAD CLEANING:The video heads are dirty. (p. 73)PUSH THE RESET SWITCH:An irregularity in the equipment has beendetected. Press the [RESET] Button (p. 78). Thismay solve the problem.LOW BATTERY:The Battery is low. Recharge it. (p. 15)NO TAPE:No tape is inserted. (p. 18)CHECK REMOTE MODE:An incorrect Remote Control Mode hasbeen selected. This is only displayed at thefirst operation of the Remote Control afterpowering-on. (p. 15)CHECK REC TAB:You are attempting to record pictures on a tapewith the accidental erasure prevention sliderplaced in the [SAVE] position.You are attempting Audio Dubbing or DigitalDubbing on a tape with the accidental erasureprevention slider placed in the [SAVE] position.WRONG TAPE FORMAT:You are attempting to play back a tape sectionthat has been recorded with a different TVsystem. This cassette is incompatible.CLOSE CASSETTE DOOR:The cassette cover is open. Close the cassettecover. (pp. 18~19)UNABLE TO A.DUB(LP RECORDED):Because the original recording was in LP Mode,audio dubbing cannot be performed.UNABLE TO A.DUB:You are attempting to perform audio dubbing ona non-recorded tape.COPY PROTECTED:Images cannot be recorded correctly becausethe medium is protected by a copy guard.CARD ERROR:The Card is not compatible with this Camcorder.You are attempting to format a failed card.It displays, when you attempt to insert theincompatible card to Card Slot.NO CARD:No card is inserted.CARD FULL:Card does not have sufficient memoryremaining.Select Picture Playback Mode and deleteunnecessary files.NO DATA:There are no recorded files on the card.UNPLAYABLE CARD:You are attempting to play back data notcompatible with this Camcorder.FILE LOCKED:You are attempting to erase protected files.CARD LOCKED:The write protection switch on the SD MemoryCard is set to [LOCK].CHANGE MODE TO USE USB:The USB Cable is connected to the Camcorderin Card Recording Mode.CANCEL MAGICPIX MODE:You are attempting to select an item other than[OFF] in [ SCENE MODE] during MagicPixMode.DISCONNECT USB CABLE:You are attempting to turn the Mode Dial in PCMode with the USB Cable connected to theCamcorder.You are attempting to record pictures on aTape/Card with the USB Cable connected to theCamcorder.PC DOES NOT SUPPORT USB2.0:The Camcorder is connected to a personalcomputer that does not support USB2.0.CAN NOT USE USB:You are connecting the USB Cable with the DVCable connected in MotionDV Mode.