Panasonic Palmcorder PV-GS90P Operating Instructions Manual

Also see for Palmcorder PV-GS90P: Service manual

Contents

Panasonic Palmcorder PV-GS90P Operating Instructions Manual Manual pdf 36 page image

Playback mode36LSQT1284Frame-by-frame playback≥Set to Tape Playback Mode.1 During playback, move the joystick up toselect the [1/;] icon to pause playback.2 Push the [sVOLr] lever.Towards [T]: normal directionTowards [W]: reversed direction≥If you keep pushing the lever, then the imageswill continuously be played back frame byframe.≥The pause icon appears for an instant.Continuous frame-by-frame playback will startafter the pause icon disappears.ª To return to normal playbackMove the joystick up to select the [1/;] icon tostart playback.Playback on TVImages recorded by this Camcorder can beplayed back on a TV.≥Insert a recorded tape into this Camcorder.≥Be sure that the power of the unit is turned offbefore connecting it to a TV.1 Connect the Camcorder and a TV.≥Connect the Camcorder and a TV by usingthe AV cable 1.2 Turn on this Camcorder and set the modedial to the Tape Playback Mode.3 Select the video input that this unit isconnected to.≥If the images are not played back correctly onthe TV (e.g. they are displayed vertically),perform the menu operations in accordancewith the aspect ratio of the TV monitor.Set [SETUP] >> [TV ASPECT] >> [16:9] or[4:3].4 Move the joystick up to select the [1/;]icon to start playback.≥The image and audio are output on the TV.5 Move the joystick down to select the [∫]icon to stop playback.≥Use the AC adaptor to free you from worryingabout the battery running down.ª If the image or audio from thisCamcorder does not appear on the TV≥Check the connections.≥Check that the plugs are inserted as far as theygo.≥Check the [12bit AUDIO] settings. (-41-)≥Check the TV’s input setting (input switch).(For more information, please read theoperating instructions for the TV.);;1[VIDEO IN][AUDIO IN]A/ V