Panasonic Palmcorder SDR-H60P Operating Instructions Manual

Also see for Palmcorder SDR-H60P: Service manual

Contents

Panasonic Palmcorder SDR-H60P Operating Instructions Manual Manual pdf 42 page image

42LSQT1394This unit will resume recording/pause modeabout 2.1 seconds after the LCD monitor isreopened.≥ When in quick start standby mode about60% of the power used in recording pausemode is being consumed, so the recordingtime will be reduced.¬ Rotate the mode dial to select or.1 Select the menu. (l 28)2 Close the LCD monitor while themode dial is set to or .The status indicator A flashes green and the unitgoes into quick start standby mode.3 Open the LCD monitor.The status indicator A lights red and the unit isput into recording pause approx. 2.1 secondsafter it is turned on.To cancel Quick startSelect [SETUP] # [QUICK START] # [OFF]≥ The default setting is on.≥ Quick start standby mode is canceled ifjabout 5 minutes elapsedjthe mode dial is switchedjthe battery is removed or the AC adaptor isdisconnected≥ In the quick start mode it may take some timefor automatic white balance to adjust, if thescene being recorded has a light sourcedifferent from the scene last recorded. (Whenthe MagicPix function is used, however, thewhite balance of the scene last recorded isretained.)≥ In the quick start mode, the zoommagnification becomes 2k and the picture sizemay differ from what it was before quick startstandby mode.≥ If [POWER SAVE] (l 29) is set to[5 MINUTES] and the unit automatically goesinto quick start standby mode, close the LCDmonitor and then open it again.Reduces the image shaking (jitter) due to handmovement when recording.¬ Rotate the mode dial to select or.Press the O.I.S. button.The image stabilizer icon [ ] appears.To cancel the image stabilizer functionPress the O.I.S. button again.≥ The default setting is on.≥ When a tripod is used, we recommend that youturn the image stabilizer off.≥ In the following cases, the image stabilizerfunction may not work effectively.jWhen the digital zoom is usedjWhen the unit is shaken greatlyjWhen you record a moving subject whiletracking itQuick start[SETUP] # [QUICK START] # [ON]AAImage stabilizer functionO.I.S.