84LSQT1319Setup2 Connection and recognitionAfter the software is installed, the unit must be connected to the PC and be correctly recognized by thePC.≥ Remove the supplied CD-ROM from your PC.≥ Be sure to finalize DVD-RW (VR format), DVD-RW (Video format) and DVD-R/DVD-R DL discson this unit, before using them on the PC. Discs that have not been finalized will not berecognized by the PC.¬ Connect this unit to the AC adaptor.1 Insert a disc or SD card withrecorded images in the unit, thenturn on the unit.2 Connect this unit and a PC.The USB function selection screen will appear.3 Select [PC CONNECT(DISC)] or[PC CONNECT(CARD)] and pressthe joystick.This unit is automatically detected by the PC.≥ When the unit is connected to a PC, itspower cannot be turned off. Disconnect theUSB cable before turning this unit off.(l 86)≥ If the unit is connected to a PC when the USBfunction is set to [PC CONNECT(DISC)], noimage will appear on the LCD monitor or theviewfinder.≥ When this unit is connected to a PC, youcannot use this unit’s DISC EJECT lever toremove a disc. Use Windows Explorer to right-click the drive icon for this unit and select[Eject].≥ Do not disconnect the USB cable or ACadaptor while the access lamp is on or SD cardaccess icon ( ) appears on the LCD monitor.Doing so may damage the data on the disc orSD card.≥ The disc and SD card cannot be accessedsimultaneously.≥ It may be necessary to reboot the PC afterconnecting this unit to it for the first time.AA USB cable (supplied)≥ Insert the USB connectors as far asthey will go.≥ Do not use any other USB connectioncables except the supplied one.(Operation is not guaranteed with anyother USB cables.)
