Assembling the Print BoardAssembly• Markers (Black, Red, Blue-Big) ······· Each 1• Eraser ························································ 1• A4 (Letter) papers* ····················· 20 sheets• Pen holder ················································· 2• Markers for interactive(Black, Red, Blue, Green-Small) ···· Each 1• Electronic eraser ········································ 1• Eraser cloth (for Electronic eraser) ··········· 2• Batteries (LR03) ········································ 6• Power cord ················································ 1• Interactive cable (5m) ································ 1• Software CD-ROM ····································· 1• Operating Instructions ································1• Software License Agreement ·····················1• Wall-mounting template ····························· 1• Film cassette ··············································1• Blue gear ····················································1• Green gears ··············································· 3• Thermal transfer film (20m) ······················· 11 Assemble the optional stand or wall-mounting kit.If you are using a stand, refer to page 88.If you are using a wall-mounting kit, refer to page 91.2 Remove the print board from the shipping box.Remove the joints, then remove the print board from the shipping box.• Do not touch the screen film surface as doing so may damage it.• The shipping box, cushioning material, and other packaging materials will be necessary if youever need to repackage the print board, so do not throw them away.NotesInstallation* KX-BP800U / G / A / T : A4KX-BP800C : Letter83