Panasonic RC-CD600 Operating Instructions Manual

Also see for RC-CD600: Operating instructions Operating instructions

Contents

Sound qualityUsing the preset equalizerPress [PRESET EQ].Each time you press the button:XBS: Emphasizes the bass;CLEAR: Clarifies higher sounds;SOFT: For background music;VOCAL: Adds gloss to vocals;OFF:Using the sound virtualizerThis effect stabilizes the midrangesounds, such as vocals, and givessound natural width and depth.Use it when listening to stereosources.Press [S. VIRTUALIZER].“ ” lights on the LCD.“ ”“ ”“ ”Manual tuningPress [FM/AM, RADIO] to select the band.Each time you press the button:FM 1 ) FM 2 ) AM 1 ) AM 2^--------------------------------------------------}Press [i, j, TUNE/CLOCK] to tune to a station.Press and hold until the frequency starts scrolling to start automatictuning. Tuning stops when a station is found.Adjust the volume.[i]: Increase[j]: Decreaseª To turn the radio offPress [POWER, Í/I].Preset tuningYou can preset up to 20 stations: 5 each in FM 1, FM 2, AM 1, and AM 2.ª PresettingWhile listening to the station you want to presetPress and hold a MEMO button ([1, 2, 3, 4,or 5]) until the channel number appears.The station occupying a channel is erased ifyou preset another station in its place.ª To listen to a preset station1. Press [FM/AM, RADIO] to select the band.2. Press the MEMO button ([1, 2, 3, 4, or 5]) to select the channel.If FM reception is poorOn the remote controlPress [FM MODE].“MONO” lights.Sound is monaural but noise isreduced.Press again to cancel.Changing the FM stepChange the FM step to receive FM stations allocated 0.1-MHz steps.First press [FM/AM, RADIO] to select FM 1. Now, press and hold [FM/AM,RADIO]. The display changes in a few seconds to show the current lowestFM frequency. Continue to hold down the button.The minimum frequency changes and the step is changed at the sametime. Changing the step erases all preset stations.Repeat the above to change the step back.To improve reception4Listening to the radio123VOL+-SLEEPPOWERÍ/I RADIO CDFM/AMMODEMEMO12345TUNE/ CLOCKCD/RADIODISP/—ADJDISP/—ADJTIME SETBUZZER12ENTERSPEAKERMODEBRIGHTNESS+-ALARMVOL+-TUNE/CLOCKMEMO buttonsPOWERÍ / IRADIOFM/AM 123FM AMExtend and change the direction ofthe antenna.FM MODEBRIGHTNESSFM/AM M1M4 M5FM MODEM2 M3CDCD MODEPRESET EQ S.VIRTUALIZERVOLUMECD CLOCK RADIOChanging the brightnessYou can dim the clock and turnthe LCD light off.Press [BRIGHTNESS].Press again to brighten the clockand turn the LCD light on.Speaker mode Select whether to have sound comefrom both units (DUAL), the main unitonly (MAIN), or the sub unit only(SUB).The mode you select applies to allsound sources and remains activeuntil you change it.Press [SPEAKER MODE].The mode changes each timeyou press the button.DUAL # MAIN # SUB^------------------------------}When using headphones, set thespeaker mode to DUAL. Sound willcome only from the left or right side ifyou set the mode to MAIN or SUB.NoteVOL+-SLEEPPOWERÍ/IRADIO CDFM/AMMODEMEMO12345TUNE/ CLOCKCD/RADIODISP/–ADJDISP/–ADJTIME SETBUZZER12ENTERSPEAKERMODEBRIGHTNESS+-ALARMSPEAKERMODEVOL+-SLEEPPOWERÍ/I RADIO CDFM/AMMODEMEMO12345TUNE/ CLOCKCD/RADIODISP/–ADJDISP/–ADJTIME SETBUZZER12ENTERSPEAKERMODEBRIGHTNESS+-ALARMBRIGHTNESSPRESET EQFM/AM M1M4 M5FM MODEM2 M3CDCD MODEPRESET EQ S.VIRTUALIZERVOLUMECD CLOCK RADIOE U R 6 4 8 2 5 9S. VIRTUALIZERFM/AM M1M4 M5FM MODEM2 M3CDCD MODEPRESET EQ S.VIRTUALIZERVOLUMECD CLOCK RADIOE U R 6 4 8 2 5 9^----------------------------------}Main unitDUALEQFM1FM1DUALFM1EQChannel number“ ”