Panasonic RC-CD600 Operating Instructions Manual

Also see for RC-CD600: Operating instructions Operating instructions

Contents

5Press and hold [DISP/%ADJ] (ALARM 2).The time display and ALARM 2 indicator startflashing.Press [i, j, TUNE/CLOCK] to set the time.Press and hold to change the time faster.Press [SPEAKER MODE] to select the unit(s) to playthrough.Each time you press the button:DUAL: alarm sounds through both units;MAIN : alarm sounds through the main unit;SUB : alarm sounds through the sub unitPress [ENTER] to complete the settings.Press [2, BUZZER] to turn the alarm on.The ALARM 2 indicator lights.The buzzer sounds at the set time and stops automatically after anhour. (You cannot change the volume of the buzzer.)Using the alarmsPress and hold [DISP/%ADJ] (ALARM 1).The time display and ALARM 1 indicatorstart flashing.Press [i, j, TUNE/CLOCK] to set the time.Press and hold to change the time faster.Select the source to wake up to.To play the radioPress [FM/AM, RADIO] to select the band and tune to the station.To play a CDPress [1/;, CD] to start playing the CD.Press [SPEAKER MODE] to select the unit(s) to playthrough.Each time you press the button:DUAL: alarm sounds through both units;MAIN : alarm sounds through the main unit;SUB : alarm sounds through the sub unitPress [VOL, i, j] to set the volume.Press [ENTER] to complete the settings.Press [1, CD/RADIO] to turn the alarm on.The ALARM 1 indicator lights.The CD or radio starts at the set time and stops automatically afteran hour. (The buzzer sounds if you didn’t insert a CD.)For your reference:You can still play a CD or the radio after you have set the alarm.123456712345VOL+-SLEEPPOWERÍ/IRADIO CDFM/AMMODEMEMO12345TUNE/ CLOCKCD/RADIODISP/–ADJDISP/–ADJTIME SETBUZZER12ENTERSPEAKERMODEBRIGHTNESS+-ALARMDOZE ALARM OFFTUNE/CLOCKDISP/–ADJBUZZER2 DISP/–ADJBUZZER212345ENTERSPEAKERMODEDISP/—ADJCD/RADIO1DISP/—ADJCD/RADIO1FM/AMRADIO CDVOL+-SLEEPPOWERÍ/IRADIO CDFM/AMMODEMEMO12345TUNE/ CLOCKCD/RADIODISP/—ADJDISP/—ADJTIME SETBUZZER12ENTERSPEAKERMODEBRIGHTNESS+-ALARMDOZE ALARM OFFTUNE/CLOCK1235467ENTERSPEAKERMODEVOL+-VOL+-Setting the CD/Radio alarm (ALARM 1) Setting the buzzer alarm (ALARM 2)You can set the unit to play either a CD or the radio with ALARM 1, or to sound a buzzer with ALARM 2. You can set the two alarms separately and choosewhich unit the alarms are to sound from.^-----------------}^-------------------}ª To shut off the alarmPress [ALARM OFF].If the speaker mode is MAIN, press [ALARM OFF] on the main unit.If the speaker mode is SUB, press [ALARM OFF] on the sub unit.The alarm stops but the settings remain intact so the alarm will soundagain at the same time the next day.ª To turn the alarm offPress [1, CD/RADIO] or [2, BUZZER].The settings remain intact. Press again to turn the alarm on again.ª To shut the alarm off temporarilyPress [DOZE].If the speaker mode is MAIN, press [DOZE] on the main unit.If the speaker mode is SUB, press [DOZE] on the sub unit.The alarm sounds again about 6 minutes later.ª To check the settingsPress [DISP/%ADJ].The clock shows the set time (ALARM 1, ALARM 2) and the LCD shows speakersetting and the source and volume for the CD/RADIO alarm (ALARM 1).SLEEPUsing the sleep timerThe sleep timer turns the unit off after a set time. You cannot set it whilean alarm is working.Press [SLEEP] to select the time (minutes).Each time you press the button:30 # 60 # 90 # 120 # OFF^---------------------------------------------}≥ To check the remaining timePress [SLEEP].≥ To change the settingPress [SLEEP] once to display the remaining time, then press again tochange the setting.ALARM 1 indicatorALARM 2 indicator

/ 8

Related manuals for Panasonic RC-CD600