Panasonic RQ-L70 Operating Instructions Manual

RQ-L70iiCiPower SourcesDry cell batteriesUse the two R6/LR6 (UM-3) batteries.When the batteries are weak, the B [] lamps will turn off one by one.AC adaptorConnect the Panasonic AC adaptor (RP-AC31B, not included) to @ [K].Tape Playback1. Insert the tape.(You can use normalposition type tapes only.)2. Slide up > [ ] to releasepause.3. Set < [ ] to [ ] or [ ].Use the same setting you used whenthe recording was made.4. Press 9 [1 ] to start playback.5. Adjust the volume with 5 [ ].Recording1. Insert the tape.(You can use normalposition type tapes only.)2. Slide up > [ ] to releasepause.3. Set < [ ] to [ ] or [ ].To record sound at a normalspeed2 To record about twice the lengthof the tape for long meetings, etc.4. Press 7 [¥ ] to start recording.9 [1 ] is also pressed with 7 [¥].Auto stopDuring playback or recording, when thetape reaches its end, the automatic stopsystem will release 9 [1 ] or 7 [¥] and automatically turn off the unit.To stop playback/recordingPress 8 [∫ ].To stop playback/recordingtemporarilySlide down > [ ].To resume, slide up > [ ] again.To listen with an earphoneConnect the stereo earphones (included)to 6 [Ë].When playing the sound through theearphones, volume can be adjusted with5 [ ].How to use the tape counter (2) andthe reset button (1)The digits advance with the tape toprovide a reference to quickly find adesired portion of tape.The digits return to “ 0 0 0 ” when the resetbutton is pressed.To fast forward or rewindPress : [6 ] (rewind) or; [5 ] (fast forward) inthe stop mode.To cue and reviewSound can be monitored at a high speedas long as : [6 ](review) or ; [5 ] (cue) isheld down during playback.When the button is released, normalplayback will start.To change the playback speedAdjust the speed with A [ ].Follow up recordingRecording can be started during playbackby simply pressing 7 [¥ ].Quick reviewThe review operation is possible duringrecording by pressing : [6], only the 7 [¥ ] will bereleased, and playback begin.To record through an externalmicrophonePlug the external microphone (included)into 4 [].≥You can use a condenser microphonewith or without built-in power supply.The numbers B- refer to the illustration on page 2.