VQT3T181414The playback speed can be adjusted in21 steps from the slow speed of 0.5 timesnormal speed (50%) to the fast speed of2 times normal speed (200%).1 Press [ OK] during playback.2 Press or to adjust theplayback speed.Playback speed• : Each press of this button increasesthe playback speed.• : Each press of this button reduces theplayback speed.The playback speed can be adjusted in10% steps for speeds faster than normalspeed, and 5% steps for speeds slowerthan normal speed.• Press [ STOP/RETURN] to return to 100%.3 Press [ OK].The setting value is confirmed.● Normal playback may not be possibledepending on the file.Set a start point (A) and finish point (B) torepeat playback between those points.1 Press [ERASE/] duringplayback.The start point (A) isset and “ ” (lighting)and “ ” (blinking) aredisplayed.A-B Repeat indication2 Press [ERASE/] at thefinish point (B).The indication changesto “ ” (lighting) andA-B repeat playbackstarts.Cancelling A-B Repeat:Press [ERASE/ ] again. (A-B Repeat canalso be cancelled with [ STOP/RETURN],or .)● You cannot set A-B Repeat when the timebetween the start point (A) and finish point(B) is approx. 2 seconds or less.● If the file is played to the end while the startpoint (A) is set, the end of the file is set asthe finish point (B) and A-B Repeat starts.● A range that spans across two files cannotbe set for A-B Repeat.Changing theplayback speed A-B Repeat playback