Panasonic RR-XS410 Owner's Manual

Also see for RR-XS400: Operating instructions

Contents

Panasonic RR-XS410 Owner's Manual Manual pdf 21 page image

VQT3T1321 Advanced OperationsSwitch the microphone sensitivity according tothe volume of the sound source. When the soundsource volume is loud, set the sensitivity to “LOW”.When it is low, set the sensitivity to “HIGH”.• Press [g STOP/RETURN] to stop the unit.1 Press [MENU].2 Press +, – to select “MIC REC MENU”and press [q OK] to enter.3 Press +, – to select “MIC SENS.”and press [q OK] to enter.4 Press +, – to select “HIGH” or “LOW” andpress [q OK] to enter.(The factory setting is “HIGH”.)To exit the setting screen, press [F2 (CLOSE)].When the microphone sensitivity isHigh or Low, “ ” or “ ” is displayedrespectively.Switching microphone sensitivity Sound of low frequency range is reduced duringmicrophone recording. This is effective whenreducing noise of air conditioning equipment, etc.while recording at a meeting, etc.• Press [g STOP/RETURN] to stop the unit.1 Press [MENU].2 Press +, – to select “MIC REC MENU”and press [q OK] to enter.3 Press +, – to select “LOW CUT FILTER”and press [q OK] to enter.4 Press +, – to select “ON” and press [q OK]to enter.(The factory setting is “OFF”.)To exit the setting screen, press [F2 (CLOSE)].“ ” is displayed.Reducing noise (LOW CUT FILTER)