Panasonic RR-XS410 Owner's Manual

Also see for RR-XS400: Operating instructions

Contents

Panasonic RR-XS410 Owner's Manual Manual pdf 26 page image

VQT3T1326When VAS (Voice Activated System) is set, if silence continues for approx. 2 secondsduring microphone recording, the recording is paused automatically. If the unit detectssound, the recording resumes.* When the recording level adjustment is MANUAL (➜ page 22), even if the VAS setting is set to ON,the setting does not change to the VAS recording.* For important recording, set the VAS setting to OFF.* If the “LOW CUT FILTER” setting is “ON”, low frequency sound may be cut out and VAS recordingmay not activate. In this case, change the “LOW CUT FILTER” setting to “OFF”. (➜ page 21)* If the recording is paused with no sound state, “ ” blinks. When [* REC] is pressed from thisrecording pause state, the status is changed to normal recording pause state and “ ” lights up.While “ ” is blinking, the “AUTO POWER OFF” (➜ page 52) function does not operate.Preventing unnecessary recording (VAS)• Set the recording level adjustment to AUTObeforehand. (➜ page 22)• Press [g STOP/RETURN] to stop the unit.1 Press [MENU].2 Press +, – to select “ MIC REC MENU”and press [q OK] to enter.3 Press +, – to select “VAS” and press[q OK] to enter.4 Press +, – to select “ON” and press[q OK] to enter.(The factory setting is “OFF”.)To exit the setting screen, press[F2 (CLOSE)].“ ” is displayed.To start VAS recording, press [* REC].Adjusting the VAS operation level:Press u, i during VASrecording.(The factory setting is “3”.)* You can adjust the sound detection level from 1 to 5.* If the audio to record is low, increase the VASvalue (sensitivity level). If the sound is loud,decrease the VAS value.g STOP/RETURNF2MENU* REC