Panasonic S-26PK2U6 Operating Instructions Manual

Also see for S-26PK2U6: Technical data & service manual

Contents

Panasonic S-26PK2U6 Operating Instructions Manual Manual pdf 14 page image

14REMOTE CONTROLLER1. Operation Display Displays the operation status.(The figure shows all the statuses.)• The auto-flap display may bedifferent, depending on theinstalled unit.2. Start/StopbuttonPressing this button once starts andpressing again stops the operation.3. Fan speedbutton4. Swing/WindDirectionbutton5. Timer settingbuttonUse for operating with a timer.6. Reset button Use this button after changing thebatteries.7. Cover Press at the top center and then slidedown.8. Transmitter9. Remote controlsensorDetects the temperature at theremote controller when detection hasbeen switched to the remotecontroller by the sensor button.10. Temperature settingbuttonsraises the temperature setting1.8°F (1°C) at a time.lowers the temperature setting1.8°F (1°C) at a time.11. Filter button CZ-RWSC3Press to turn off the filter lamp on thereceiver.12. Mode SelectbuttonPress to switch the operation mode.13. VentilationbuttonUse this when connected to anaftermarket fan. Pressing this buttonstarts and stops the fan. When the airconditioner is started or stopped, thefan starts or stops at the same time.( appears on the display of theremote controller when the fan isoperating.)14. Addressbutton15. Sensor button Use this when switching to detect thetemperature at the remote controller.At shipping the default setting is setto detect the temperature at the unit.At this time is shown on thedisplay.16. Clock button Use this when setting the clock.From this page on the names of remote controlbuttons will be abbreviated as the illustration of the“button”.E.g.: Start/Stop button12345678910111213141516