Panasonic SA-PT465EE Service Manual

Contents

Caution Note: Keep the AC Inlet shield plate unit in safeplace. Avoid denting it. Place it back during assembling.Step 4 Remove the D-Amp P.C.B. bracket.Step 5 Remove AC Inlet P.C.B.Caution Note: Keep the D-Amp P.C.B. bracket in safeplace. Avoid denting it. Place it back during assembling.Special Note: During reassembling procedures, ensure theP.C.B. is seated properly at the locators.7.14. Disassembly of Main P.C.B.•••• Follow (Step 1) to (Step 3) of Item 7.3.Step 1 Remove 3 screws at the rear panel.Step 2 Remove 3 screws on Main P.C.B.Step 3 Detach 17P FFC cable at the connector (CN2007) onthe Main P.C.B.Step 4 Detach 4P FFC cable at the connector (CN2013) on theMain P.C.B.Step 5 Detach 13P cable at the connector (CN2016) on thePower Supply P.C.B.Step 6 Detach 28P cable at the connector (CN6001) on thePower Supply P.C.B.Step 7 Detach 12P cable at the connector (CN7000) on the MicP.C.B.Step 8 Detach Main P.C.B. from the rear panel.Step 9 Turn over Main P.C.B. to detach 17P FFC cable at theconnector (CN2009) on the Main P.C.B.Step 10 Detach 50P FFC cable at the connector (CN2001) onthe Main P.C.B.Step 11 Detach 22P FFC cable at the connector (CN2801) onthe Main P.C.B.Step 12 Remove Main P.C.B.23SA-PT465EE