Panasonic SC-NE3 Operating Instructions Manual

Also see for SC-NE3: Owner's manual Connection guide Owner's manual Quick guide Operating instructions

Contents

7VQT4U54 ENGLISH∫ Using the WPS Push ButtonConfiguration (PBC)1 Press and hold [– WPS] on the unit.{. “WPS” flashes on the display.(The Wi-Fi status indicator blinks blue.)≥ Complete step 2 within 2 mins.2 After “WPS” is indicated, press the WPS button onthe wireless network router.3 The unit’s settings are completed when“SUCCESS” is displayed and the Wi-Fi statusindicator stops blinking and lights in blue.4 Press [OK] on the remote control to exit thesetting.≥ To use the WPS PIN code, refer to the notes on page 8.You can make the wireless network settings with theapp, “Panasonic Stereo System Network Setup” (forfree).If you’re using an Android device, download the app atthe Google Play Store. If you’re using an iPod touch/iPhone/iPad, download it at the App Store.Preparation≥ Connect your smartphone to your home wirelessnetwork.≥ Check the password for your home wireless network.1 Press [SETUP] on the remote control repeatedlyto select “NET SETUP” and then press [OK].{. “SETTING” is indicated on the display.(The Wi-Fi status indicator blinks purple.)2 Start “Panasonic Stereo System NetworkSetup” on your smartphone and follow theindications.∫ Note for the iOS versionAfter step 21 Enter the password for the home wireless networkto which the iOS device is connected.2 When a message instructing you to connect theiOS device to this unit is displayed, press thehome button to close the app.3 On the Wi-Fi network selection screen in“Settings”, select “00 Setup _ _ _ _ _ _”.≥ “ _ ” stands for a digit that is unique to each set.4 When a message indicating the completion of theconnection to this unit is displayed, restart the app.5 When a message indicating the completion of theWi-Fi setup of this unit is displayed, close the app,and then check the operation of AirPlay, etc.≥ “Panasonic Stereo System Network Setup” for Mac OS isalso available at the App Store.With this method, you will access this unit’s wirelessnetwork settings from the Internet browser of yourcompatible device.≥ The following explanations are based on an iPhone.1 Press [SETUP] on the remote control repeatedlyto select “NET SETUP” and then press [OK].{. “SETTING” is indicated on the display.(The Wi-Fi status indicator blinks purple.)2 After “SETTING” is indicated, connect yourcompatible device to this unit’s wireless networknamed “00 Setup _ _ _ _ _ _”.≥ “ _ ” stands for a digit that is unique to each set.≥ Make sure that DHCP is enabled for the network settingon your compatible device.Method 1If your wireless network router supports WPS(Wi-Fi Protected Setup TM).The WPS identifier markWPS Push Button Configuration(PBC) compatible wireless networkrouter may have this mark.“FAIL” may be displayed if the connection was notmade within the set time limit. Try the setting again.If “FAIL” is still displayed, try other methods.Method 2Setting the network connection with the smartphoneappMethod 3Setting the network connection from an Internetbrowser.