Panasonic SC-UA7 Operating Instructions Manual

Also see for SC-UA7: Operating instructions Owner's manual User manual

Contents

ConfidentialUntil:1 Aug 20165 RQT0B175Preparing the remote controlUse alkaline or manganese battery.Install the battery so that the poles (+ and –) align withthose in the remote control.Making the connectionsConnect the AC mains lead only after all the otherconnections have been made.1 Connect the FM indoor antenna.Put the antenna where reception is best.2 Connect the AC mains lead.Do not use any other AC mains leads except thesupplied one.Conserving powerThe system consumes a small amount of power evenwhen it is in standby mode. Disconnect the powersupply if you do not use the system.Some settings will be lost after you disconnect thesystem. You have to set them again.Adhesive tape(not supplied)To householdmains socketAttaching the ferrite core near to the terminalA Pull on the tabs (both sides)to open.B Put the AC mains lead ontoone of the concave surfaces.C Coil the AC mains leadaround the ferrite core andonto the other concavesurface.D Close the ferrite core until itclicks.Note:Failure to attach the ferrite core tothe AC mains lead may causeinterference to other devicesnearby.ENGLISHSC-UA7 GS RQT0B17-G En.fm Page 5 Monday, July 4, 2016 8:32 AMoffset printing