Panasonic SD MULTI AV SV-AV10B Operating Instructions Manual

Contents

Panasonic SD MULTI AV SV-AV10B Operating Instructions Manual Manual pdf 12 page image

12MPEG4 RECORDPRESS MENU TO RETURNRECORDING SETUPOTHER FUNCTIONSOTHER FUNCTIONSPRESS MENU TO RETURNDATE/TIME OFF D/T TIMEDISPLAY OFF ONLCD SET YESLCD MONITORNORMAL UPSIDE-DOWNAC MAINS 50HZ 60HZCLOCK SET YES1/1001/12045Setting the power supply frequencySet the power supply frequency before using the SD Multi AV Device.The power supply frequency is different depending on the country orregion.Adjustment of the frequency will help reduce the appearance ofhorizontal stripes consisting of light and dark patterns under fluorescentlighting.1 Set the Operation Mode to [REC>> MPEG4] or [REC>>PICTURE] 1. (l 8)2 Select the [OTHER FUNCTIONS] 2.3 Set the [AC MAINS] 3 to [50 HZ] or [60 HZ].≥This setting may not completely suppress the horizontal stripes≥Irrespective of the setting, the horizontal stripes may still be presentedin the following cases.-When using the SD Multi AV Device to record pictures under alighting instrument such as a high-frequency fluorescent lamp:-When using the SD Multi AV Device to record a lighting instrumentsuch as a fluorescent lamp:ª To reduce the appearance of horizontal stripesconsisting of light and dark patternsIf adjustment of the frequency does not have much effect on reducinghorizontal stripes, operate the SD Multi AV Device as follow.1 Set the Operation Mode to [REC>> MPEG4] or [REC>>PICTURE] 1.(l 8)2 Move the Jog Lever down for about 1 second.≥The [1/100] Indication 4 appears when the power supplyfrequency is set to [50 Hz].≥The [1/120] Indication 5 appears when the power supplyfrequency is set to [60 Hz].To Release this modeMove the Jog Lever down for about 1 second.≥Turning the power OFF will release this mode.≥It is not possible to use Backlight Compensation Mode when this modeis set to ON.≥If this mode is used for outdoor recording, the entire image on thescreen (or recording images) may be tinged with white.≥This mode cannot be set or released while recording.≥The SD Multi AV Device adjusts the brightness by varying the shutterspeed. However, the shutter speed is fixed in this mode and thebrightness cannot be adjusted.VOL +- /MENUMODE/VOLMPEG4PICTUREVOICEPUSH/SETSELECTRECPLAY1232,311,2,3