29Installing SD-MovieStage (Cont.)8 Click the [YES] Button.≥The necessary software for the SD-MovieStage is installed.9 Click [Yes] Button to create the short-cut icon on thedesktop.10 At the end of the Setup, click on the [Finish] Button.≥After rebooting the computer, the SD MovieStage is enabled.≥For the information of the operation of SD-MovieStage, refer to theinstruction in the PDF file that was installed together with thissoftware. Adobe® Acrobat® Reader® (refer to http://www.adobe.com/) is required to read PDF files.≥The screen image inserted into this manual is captured fromEnglish version.ª Cautions for Windows XP/2000 ProfessionalWhen installing or using this software, specify the user name to[Administrator (computer administrator)] or any other user name havingthe equivalent right. Then log on with that user name to install thissoftware.(If you don't have such a right, consult with your system administrator).Starting SD-MovieStageThe step below starts the SD-MovieStage. Please read the PDF-basedInstructions for using the SD-MovieStage.1 Select [Programs] >> [Panasonic] >> [SD-MovieStage]>> [SD-MovieStage] from the Windows start menu.≥SD-MovieStage will start.≥If you use Windows 98SE, install Panasonic Media Manager (suppliedaccessory) before using the SD-MovieStage.OthersNotes & Precautionsª Charge the built-in battery for maintaining the dateinformation.This built-in battery is used for the memory of date and time. If [0] isdisplayed when the power is on, the built-in battery may be exhausted.Charge using the following procedure:1 Take the battery out and plug in the AC adapter (l 6).2 Turn the power off and leave this SD Multi AV Device asit is for about 12 hours.ª After Use.1 Turn off the SD Multi AV Device.2 Take out the Card.3 Detach the power supply and retract the LCD Monitor.4 Put the SD Multi AV Device into the Carrying Case.1089DC IN 4.8V