104VQT3E42If faulty management information is found, the messages may appear. Be sure to followdirections in the messages. (Repairing may take time depending on the error.)≥ The above message is displayed when abnormal management information is detectedwhen the scenes are displayed in thumbnail. To perform the repair, select the scene within the thumbnail, and start the playback. Please be aware that if the repair fails,scenes with will be deleted.≥ Use a sufficiently charged battery or the AC adaptor.≥ Depending on the condition of the data, it may not be possible to completely repair thedata.≥ If recovery fails, recorded scene playback will be impossible before power is turned OFF.≥ When data recorded on another device is recovered, it may not be possible to play backthe data on this unit or the other device.≥ If recovery fails, turn the power of the unit off and on again after waiting a while. If recoveryfails repeatedly, format a media on the unit. Please be aware that if a media is formatted,then all the data recorded on the media will be erased.≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.THIS BATTERY CANNOT BE USED.≥ Use a battery that is compatible with this unit. (l 19)If using a Panasonic battery compatible with this unit, remove the battery and theninsert it again. If the message appears even after repeating this several times, this unitneeds repair. Detach the power and contact consumer support. (l 124, 125) Do notattempt to repair it by yourself.≥ You are attempting to connect an AC adaptor not compatible with this unit. Use thesupplied AC adaptor. (l 20)PLEASE CHECK EXTERNAL DRIVE OR DISC.A disc that cannot be used when connecting the unit to the DVD burner has beeninserted, or the DVD burner is not recognized properly. Connect the USB ConnectionCable again and insert a disc to copy the data. (l 79)About recoverySOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED.(IRREPARABLE SCENES WILL BE DELETED.)