94VQT3E42With a PCSetup2 Connecting to a PC≥ Connect this unit to the PC after the software applications are installed.≥ Remove the supplied CD-ROM from your PC.A USB cable (supplied)1 Connect this unit to the ACadaptor.≥ It is possible to use the unit connected tothe PC with the batteries only, but you willnot be able to write data into the unit.≥ Use the AC adapter to free you fromworrying about the battery running down.2 Turn on the unit.≥ This function is available in all modes.≥ When using the battery, the LCD monitorwill be turned off after about 5 seconds.Operating the joystick will cause the LCDmonitor to turn on again.3 Connect this unit to a PC.≥ Insert the USB connectors as far as theywill go.≥ Do not use any other USB cables exceptthe supplied one. (Operation is notguaranteed with any other USB cables.)≥ The Smart wizard screen is automaticallydisplayed when VideoCam Suite 3.5 isinstalled.≥ This unit is automatically recognized as anexternal drive of the PC. (l 97)≥ A USB function selection screen will bedisplayed if VideoCam Suite 3.5 has notbeen installed. Use the joystick to select[PC], then press the center of thejoystick.When you select an option otherthan [PC], reconnect the USB cable.≥ When Windows is used as the PCoperating system, a message promptingto format may display when a SDXC cardis read. (Please be aware that if a media isformatted, then all the data recorded onthe media will be erased.)http://panasonic.net/avc/sdcard/information/SDXC.html
