With a computer79LSQT1211≥ Depending upon the environment of your computer, if it does not support Hi-Speed USB (USB 2.0),for example, frame dropout may occur, the audio may be intermittent, or the software may run slowlywhen you play back recorded images.≥ Set the display resolution to 1024k768 (16 bits colour) or higher.Select [start] # ([Settings] #) [Control Panel] # ([Appearance and Themes] #) [Display] and select[Settings] tab, and then adjust [Screen resolution] and [Color quality].≥ This unit’s USB terminal is read only. It cannot be used to write data to the unit from the computer.∫ Using Built-in SD Drive≥ The USB equipment operates with the driver installed as standard in the OS.∫ Usable discsThe table below lists the types of DVD discs which can be used by the supplied software.* If a DVD-RAM driver is installed, it may not be possible to use DVD-RAM discs.≥ Depending on your computer, it may not be possible to use some of the DVD discs listed in the tableabove.≥ Refer to the operating instructions of your computer for details about the DVD discs which can bewritten to on the computer.≥ To playback a DVD disc created using ImageMixer3, the player must support playback of that DVDdisc. (Refer to the operating instructions of the player.)≥ Use discs made by a trustworthy manufacturer. It may not be possible to record images properly ifyou use low-quality discs.Hardware IBM PC/AT compatible personal computerOS Microsoft Windows 2000 ProfessionalMicrosoft Windows XP Home EditionMicrosoft Windows XP ProfessionalCPU Intel Pentium II 300 MHz or higherRAM 32 MB or more (64 MB or more recommended)Interface USB 1.1 or later — A typeDisc typeFunctionFor creating discs(DVD-Video format)/DVD COPYFor creating discs(DVD-VR format)DVD-R/iR ¥ jDVD-R DL /iR DL ¥ jDVD-RW/iRW ¥ ¥ (DVD-RW only)DVD-RAM j ¥*¥: Can be used. j: Cannot be used.LSQT1211(PAL_ENG).book 79 ページ 2007年2月13日 火曜日 午後1時14分Downloaded From VideoCamera-Manual.com Manuals