15LSQT1555The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always“live” as long as the AC adaptor is connected to an electrical outlet.Important:While the DC cable is connected to the AC adaptor, the battery will not charge.1 Connect the AC cable to the ACadaptor and the AC outlet.2 Connect the DC cable to the ACadaptor.3 Connect the DC cable to this unit.≥ Do not use the AC cable with any otherequipment as it is designed only for this unit.Also, do not use the AC cable from otherequipment with this unit.Battery capacity indication≥ The display changes as the battery capacity reduces. # # # #If there is less than 3 minutes remaining, then will become red. If the battery discharges,then ( ) will flash.≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use forthis unit. It may take time to display the remaining battery capacity. The actual time can varydepending on your actual use.≥ The maximum amount of remaining battery capacity able to be indicated is 9 hours 59 minutes. Ifthe actual remaining time exceeds 9 hours 59 minutes, the indication will stay green and will notchange until the remaining time falls below 9 hours 59 minutes.≥ When turning the mode dial to switch modes, the time indication will turn off momentarily in order torecalculate the remaining battery capacity time.≥ When using the AC adaptor or batteries made by other companies, the remaining battery capacitywill not be shown.Connecting to the AC outlet
