Panasonic SDR-H81 Operating Instructions Manual

Contents

Panasonic SDR-H81 Operating Instructions Manual Manual pdf 37 page image

37LSQT1555This unit will resume recording/pause modeabout 0.8 seconds after the LCD monitor isreopened.≥ When in quick start standby mode about60% of the power used in recording pausemode is being consumed, so the recordingtime will be reduced.¬ Rotate the mode dial to select or.1 Select the menu. (l 22)2 Close the LCD monitor while themode dial is set to or .The status indicator A flashes green and the unitgoes into quick start standby mode.3 Open the LCD monitor.The status indicator A lights red and the unit isput into recording pause approx. 0.8 secondsafter it is turned on.To cancel Quick startSelect [SETUP] # [QUICK START] # [OFF]≥ The default setting is on.≥ Quick start standby mode is cancelled ifjabout 5 minutes elapsedjthe mode dial is switchedjthe battery is removed or the AC adaptor isdisconnected≥ In the quick start mode it may take some time forautomatic white balance to adjust, if the scenebeing recorded has a light source different fromthe scene last recorded. (When the colour nightview function is used, however, the whitebalance of the scene last recorded is retained.)≥ In the quick start mode, the zoom magnificationbecomes 1k and the picture size may differ fromwhat it was before quick start standby mode.≥ If [ECONOMY] (l 23) is set to [5 MINUTES]and the unit automatically goes into quick startstandby mode, close the LCD monitor and thenopen it again.Reduces the image shaking (jitter) due to handmovement when recording.¬ Rotate the mode dial to select or .Press the O.I.S. button.O.I.S.: Optical Image StabilizerThe image stabilizer icon [ ] appears.To cancel the optical image stabilizer functionPress the O.I.S. button again.≥ The default setting is on.≥ Set the intelligent auto mode to off before turningthe optical image stabilizer function to off.≥ When a tripod is used, we recommend that youturn the image stabilizer off.≥ In the following cases, the image stabilizerfunction may not work effectively.jWhen the digital zoom is usedjWhen the unit is shaken greatlyjWhen you record a moving subject whiletracking itQuick start[SETUP] # [QUICK START] # [ON]Optical image stabilizerfunctionO.I.S.