32VQT2L14PreparationSetup6 Setting date and timeWhen the unit is turned on for the first time, a message asking you to set the date and timewill appear.Select [YES] and perform steps 2 to 3 below to set the date and time.¬ Change the mode to .1 Select the menu. (l 27)2 Select the date or time, thenadjust the desired value withthe joystick.A Displaying the World time setting(l 33):[HOME]/ [DESTINATION]≥ The year can be set between 2000 and2039.≥ The 12-hour system is used to display thetime.3 Press the joystick to enter theselection.≥ The clock function starts at [00] seconds.≥ A message may be displayed promptingyou to set the world time. (l 33)≥ Press the MENU button to complete thesetting.Changing the date and time displaymodeSelect the menu. (l 27)[SETUP] # [DATE/TIME] # [OFF]/[D/T]/[DATE]Changing the date formatSelect the menu. (l 27)[SETUP] # [DATE FORMAT] # [Y/M/D]/[M/D/Y]/[D/M/Y]≥ The date and time function is driven by abuilt-in lithium battery.≥ When this unit is purchased, the clock isset. If the time display becomes [- -], thebuilt-in lithium battery needs to becharged. To recharge the built-in lithiumbattery, connect the AC adaptor or attachthe battery to this unit. Leave the unit as itis for approx. 24 hours and the battery willmaintain the date and time for approx.6 months. (The battery is still beingrecharged even if the power is off.)[SETUP] # [CLOCK SET]
