Others102VQT1D97It is possible that the system cannot complete writing of a file normally when, forexample, power is turned off for some reason during recording or editing.If faulty management information is found when the card is accessed, the followingmessage may appear. Be sure to follow the messages. (Repairing may take timedepending on the error.)≥ When you repair the data, use a battery with sufficient battery power or the ACadaptor. Even if the power is turned off without repairing the data, you can repair thedata when you turn the power on again.≥ Depending on the condition of the data, it may not be possible to completely repairthe data.≥ Do not repair a card that has been recorded on another device. This may cause theloss of data or the card.≥ If the recovery fails, you will no longer be able to play back the scenes recordedbefore the power went off.≥ If the recovery fails, format the SD card on this unit. Please be aware that if an SDcard is formatted, then all the data recorded on the card will be erased.EXIT THE MENU THENCHANGE TO MANUALMODE. You are attempting to use a function that cannot beused simultaneously.CANCEL MAGICPIX MODE.PLEASE CONNECT ACADAPTORYou are attempting to connect to a computer whenthe AC adaptor is not connected.PUSH THE RESETSWITCH.An irregularity in the unit has been detected.Remove the SD card then press the RESET buttonto restart the unit. (l 109)DISCONNECT USBCABLE.The unit cannot correctly establish the connectionto the computer or printer. Disconnect andreconnect the USB cable and then select thedesired USB function again.CANNOT OPERATE WHILECONNECTED TOCOMPUTER.The unit’s power cannot be turned off when the unitis connected to the computer.About recoveryCARD ERROR DETECTED. NOW REPAIRING DATA.
