35LSQT1511The zoom microphone is linked to the zoomingoperation so that far-away sounds with a tele-shot and close-up sounds with a wide-angle shotare recorded more clearly.¬ Rotate the mode dial to select .Select the menu. (l 21)¬ Rotate the mode dial to select or.Rotate the LCD monitor towards thelens side.≥ The image is horizontally flipped as if you seea mirror image. (However the image recordedis the same as a normal recording.)≥ When the LCD monitor is rotated towards thelens side, the icon will not be displayed even ifyou press the joystick.≥ Only some indications will appear on thescreen. When [°] appears, return thedirection of the LCD monitor to normal positionand check the warning/alarm indication. (l 86)This unit will resume recording/pause modeabout 0.8 seconds after the LCD monitor isreopened.≥ When in quick start standby mode about60% of the power used in recording pausemode is being consumed, so the recordingtime will be reduced.¬ Rotate the mode dial to select or.1 Select the menu. (l 21)2 Close the LCD monitor while themode dial is set to or .The status indicator A flashes green and the unitgoes into quick start standby mode.3 Open the LCD monitor.The status indicator A lights red and the unit isput into recording pause approx. 0.8 secondsafter it is turned on.To cancel Quick startSelect [SETUP] # [QUICK START] # [OFF]≥ The default setting is on.≥ Quick start standby mode is cancelled ifjabout 5 minutes elapsedjthe mode dial is switchedjthe battery is removed or the AC adaptor isdisconnectedTo use the zoom microphonefunction[ADVANCED] # [ZOOM MIC] # [ON]Recording yourselfQuick start[SETUP] # [QUICK START] # [ON]
