94LSQT1511OthersCautions for use≥ The unit and SD card become warm after longoperation, but this is not a malfunction.Keep the SD Video Camera as far away aspossible from electromagnetic equipment(such as microwave ovens, TVs, video gamesetc.).≥ If you use the SD Video Camera on top of ornear a TV, the pictures and sound on the SDVideo Camera may be disrupted byelectromagnetic wave radiation.≥ Do not use the SD Video Camera near cellphones because doing so may result in noiseadversely affecting the pictures and sound.≥ Recorded data may be damaged, or picturesmay be distorted, by strong magnetic fieldscreated by speakers or large motors.≥ Electromagnetic wave radiation generated bymicroprocessors may adversely affect the SDVideo Camera, disturbing the pictures andsound.≥ If the SD Video Camera is adversely affectedby electromagnetic equipment and stopsfunctioning properly, turn the SD VideoCamera off and remove the battery ordisconnect AC adaptor. Then reinsert thebattery or reconnect AC adaptor and turn theSD Video Camera on.Do not use the SD Video Camera near radiotransmitters or high-voltage lines.≥ If you record near radio transmitters orhigh-voltage lines, the recorded pictures andsound may be adversely affected.Make sure to use the supplied cords andcables. If you use optional accessories, usethe cords and the cables supplied with them.Do not extend the cords and the cables.Do not spray insecticides or volatilechemicals onto the unit.≥ If the unit is sprayed with such chemicals, itsbody may be marred and the surface finishmay peel off.≥ Do not leave rubber or plastic products incontact with the unit for a long time.When you use the unit in a sandy or dustyplace such as a beach, do not let sand or finedust get into the body and terminals of theunit.Also, keep the unit away from sea water.≥ Sand or dust may damage the unit. (Careshould be taken when inserting and removingan SD card.)≥ If sea water splashes onto the unit, wipe off thewater with a well wrung cloth. Then wipe theunit again with a dry cloth.When carrying the unit, do not drop or bumpit.≥ A strong impact can break the unit’s casing,causing it to malfunction.Cleaning≥ Before cleaning, detach the battery or pull theAC cable from the AC outlet, and then wipe theunit with a soft, dry cloth.≥ If the unit is very dirty, dip a cloth in water andsqueeze firmly, and then wipe the unit with thedamp cloth. Next, dry the unit with a dry cloth.≥ Use of benzine, paint thinner, alcohol, ordishwashing liquid may alter the camera bodyor peel the surface finish. Do not use thesesolvents.≥ When using a chemical dust cloth, follow theinstructions that came with the cloth.Do not use the unit for surveillance purposesor other business uses.≥ This unit was designed for consumerintermittent use. It was not intended forcontinuous use, or for any industrial orcommercial application resulting in prolongeduse.≥ In certain situations, continuous use couldcause the unit to overheat and cause amalfunction. Such use is strongly discouraged.About this unit