Panasonic SDR-S71 Operating Instructions Manual

Also see for SDR-H101: Operating instructions Operating instructions

Contents

Panasonic SDR-S71 Operating Instructions Manual Manual pdf 100 page image

100VQT3E89OthersIndications2 MessagesMajor confirmation/error messages to be indicated on the screen in text.* onlySDR-H101RECOMMEND DATA BACK UP PERIODICALLY.*We recommend backing up important recorded motion pictures and still picturesperiodically to a PC, DVD disc etc. to protect it. This message does not indicate that thereis a problem with this unit.HDD BACKUP RECOMMENDED.*There is a possible problem with the HDD. Copy the motion pictures and still picturesstored on the HDD to a PC or a DVD disc immediately (l 77, 84), and detach the powerand contact your dealer.HDD ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.*Access to HDD failed. Turn on the power again. Make sure not to give a strong shock orimpact to the unit.CANNOT OPERATE DUE TO LOW TEMPERATURE.*The internal temperature of this unit is extremely low so it cannot be operated.If “Please Wait.” appears after this message, wait a while without turning the unit off. Itmay take time until the unit can be used.CHECK CARD.This card is not compatible or it cannot be recognised by the unit.If this message appears even though motion pictures and still pictures are recorded on anSD card, the card may be unstable. Reinsert the SD card, then turn the power off and thenon again.THIS BATTERY CANNOT BE USED.≥ Use a battery that is compatible with this unit. (l 12)If using a Panasonic battery compatible with this unit, remove the battery and theninsert it again. If the message appears even after repeating this several times, this unitneeds repair. Detach the power and consult the dealer who you purchased this unitfrom. Do not attempt to repair it by yourself.≥ You are attempting to connect an AC adaptor not compatible with this unit. Use thesupplied AC adaptor. (l 14)PLEASE CHECK EXTERNAL DRIVE OR DISC.A disc that cannot be used when connecting the unit to the DVD burner has been inserted,or the DVD burner is not recognised properly. Connect the USB Connection Cable againand insert a disc to copy the data. (l 77)