70VQT3E89PlaybackEditing2 Dividing a scene topartially delete [SDR-H101]This divides the recorded scenes in two and deletes the front half or back half.¬ Change the mode to , and switch play mode selection to [HDD]/[VIDEO](l 59)1 Select the menu. (l 23)2 Select the scene to be divided,then press the joystick.3 When you reach the point where youwant to divide the sceneSelect [ ] with the joystick.≥ Move the joystick left or right to fastforward/rewind playback.≥ Using slow-motion playback or frame-by-frame playback makes it easy to searchfor the point where you want to divide thescene. (l 61)4 Select the half that you want todelete and press the joystick.5 Select [YES], then press thejoystick to play back the part tobe deleted.≥ When [NO] is selected, the confirmationmessage appears.Proceed to step 7.6 When you stop the playback,the confirmation messageappears.7 Select [YES], then press thejoystick.To continue dividing and deletingother scenesRepeat steps 2 to 7.To complete editingPress the MENU button.≥ It is impossible to divide and deletescenes with a short recording time. Thelength of the remaining scenes must be3 seconds or longer.≥ It is impossible to set the dividing point atthe beginning or the end of the scene.≥ When a scene that was divided anddeleted using the SPLIT&DELETEfunction is copied to a disc using the DVDburner or the supplied software andplayed back on another device, amaximum of about 1 second of thedeleted part may be played back.≥ The actual division may slightly slip off thepreviously designated dividing point.[EDIT SCENE] # [SPLIT&DELETE]
