Panasonic SF2H Series Operating Instructions Manual

72English[Backup input change]Displays whether or not operating conditions for theBackup Input function are met.[Inactive]:Indicates that the conditions are not met, andinactivates the Backup Input function.[Active]:Indicates that the conditions are met, and activatesthe Backup Input function.[Main input]Displays the (main) input set by switching input.[Current input]Displays whether the input currently in use for viewingis the (main) input set by switching input or thebackup one.Setting conditionsThe following table describes restrictions (availablecombinations) on each setting item.MainHDMI1HDMI2DIGITALLINKDVI-DPCVIDEO USBBackupHDMI1HDMI2DIGITALLINKDVI-D○ ○ ○PCVIDEO ×USB ○ ○ ×○ : Selectable for both Primary and Secondary.: Selectable for either Primary or Secondary.× : Not selectable for neither Primary nor Secondary.Recall displayPressing displays any of the followings.● When the main input is being used for viewing andthe operating conditions for the Backup Input functionare met.HDMI116:9Backup mode OK● When the backup input, enabled by the operation ofthe Backup Input function, is being used for viewing.HDMI116:9Primary backup inputWhen the conditions for the Backup Input functionare met, the following screen is displayed.Backup mode OKNote● This menu will be greyed out and cannot be set underthe following condition.• [Input search] is set to the item other than [Off].(see page 69)• When [Setup] - [Image settings] - [No signal imagesettings] - [Display setting] is set to [On]. (see page55)● When set to the USB input, the unit determines videosignals are interrupted by judging the USB memory isnot connected to the USB terminal.● This function may not operate correctly depending onthe image playback device.Audio input selectSet up the sound when a video input is selected.1 Select the video input with .Set the audio input with .HDMI1HDMI2DIGITAL LINKDVI-DPCVIDEO AV INAV INAV INDIGITAL LINKHDMI2HDMI1Audio input select● The illustration above shows the factory settings.Video input Audio inputHDMI1 HDMI1 / AV IN / No audioHDMI2 HDMI2 / AV IN / No audioDIGITAL LINK DIGITAL LINK / AV IN /No audioDVI-D / PC /VIDEO AV IN / No audio● No audio: No audio input (Mute)When the setting for the audio input has beenchanged from the factory settings, the audio input isdisplayed as below.HDMI116:9AV IN