Panasonic SF2H Series Operating Instructions Manual

96EnglishUsing “USB mediaplayer”Function descriptionThe USB media player displays still pictures and motionpictures saved in a USB memory by inserting the USBmemory device into the display.Note● To use this function, set [USB media player] to[Enable] in [Setup] - [USB media player settings]. (seepage 63)● When using the “Single Media Player”, the unitprevents a black screen from appearing at theswitching timing of still pictures or motion pictures.Note the following restrictions.(1) A black screen may appear when switching amotion picture codec.(2) A black screen may appear or images may bedisturbed when switching to motion pictures of adifferent frame rate or aspect ratio.If an angle of view for something other than for16:9 is used, images may be disturbed near theend of playback.Inserting a black screen (approx. 2 sec.) at theswitching timing for all the motion pictures can avoidimage disturbance in above (2).([USB media player settings] (see page 63))● Using the content list delivery function of the MultiMonitoring & Control Software (see page 85), content(still/motion pictures) played back on a USB mediaplayer and the playback list can be delivered.(Still pictures that can be delivered are only jpg files.)For details, refer to the manual of Multi Monitoring &Control Software.Single Media PlayerFiles are played by a single unit.USBmemoryMulti Media PlayerConnecting more than one unit using LAN cables playsback files in the USB memory simultaneously.One of the multiple units becomes the parent, and theothers are children. The two-unit configuration exampleis shown below.For LAN connection, see “Network environment (MultiMedia Player only)” (see page 102).USB memoryParent ChildUSB memoryHub or broadband routerNote● For Multi Media Player, one USB memory device isrequired for one unit.● For Multi Media Player, the parent requires both“scenario.dat” and “filelist.dat”, and the child requires“filelist.dat” only.● Describe “GroupID:G01” without changing charactersother than numbers (2-digit description required).Without description, the Multi Media Player does notfunction.● When motion pictures are played on the multi mediaplayer, a black screen may be displayed for a certainperiod of time at the switching timing of motionpictures.● If this unit is adjacently installed when using theLightID function, the reception sensitivity of LightID ona smartphone, etc. may be degraded.