Cable for series connection: 2 pcs./set(common for emitter and receiver)Model No. Cable length RemarksSF4A-CSL02 200mmSF4A-CSL05 500mmSF4A-CSL10 1,000mmSF4A-CSL30 3,000mmUsed to connect sensors in series.Common for emitter and receiver with caps. Side mounting bracket: 4 pcs./setModel No. RemarksMS-SF2N-3 Used for side mounting of sensors. U-shaped side mounting intermediate supporting bracket: 2 pcs./set[U-shaped side mounting supporting bracket, retaining plate, 2 pcs. each]Model No. RemarksMS-SF2N-4 SF4-AH□MS-SF4A-H4 SF4-AH□-HUsed to hold the sensor at the intermediateposition for side mounting. L-shaped intermediate supporting bracket: 2 pcs./setNote: When installing this device having 36 beam channels or more at places wherevibration is intense, use the necessary number of intermediate supportingbrackets at the specified positions.1 set: SF4-AH36(-H), SF4-AH40(-H)2 sets: SF4-AH48(-H)3 sets: SF4-AH56(-H), SF4-AH64(-H), SF4-AH72(-H)4 sets: SF4-AH80(-H)5 sets: SF4-AH88(-H), SF4-AH96(-H)Model No. RemarksMS-SF2N-L Used to install the U-shaped rear (side) mounting intermediatesupporting bracket on the wall side, etc. Center mounting bracket: 4 pcs./setNotes: 1) The same quantity of the intermediate supporting bracket as the U-shapedside mounting intermediate supporting bracket is required.1 set: SF4-AH36(-H), SF4-AH40(-H)2 sets: SF4-AH48(-H)3 sets: SF4-AH56(-H), SF4-AH64(-H), SF4-AH72(-H)4 sets: SF4-AH80(-H)5 sets: SF4-AH88(-H), SF4-AH96(-H)2) Since L-shaped intermediate supporting bracket is common for rear mountingand side mounting, in case of side mounting of sensor, the enclosedMS-SF2N-L can be used.M4 (length 10mm)hexagon-socket-head bolt:2 pcs., M3 (length 10 mm),pan head screw: 2 pcs.,Nut: 2 pcsModel No. RemarksMS-SF2N-5 Used for one-point rear mounting.Convenient for mounting on an aluminum frame.Note: When using the intermediate supporting bracket, it is not possible to mount thiscenter mounting bracket to the aluminum flame.© Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SF4A No.0038-55V- 33 -