Panasonic SH-WL40 Operating Instructions Manual

Contents

TQBM0010 3Control reference guideTopRear1 Power indicatorThe unit is in the standby condition when the ACadaptor is connected. The primary circuit is always“live” as long as the AC adaptor is connected to anelectrical outlet.2 5 G indicator3 2.4 G indicator4 LINK / Wireless LAN Signal Strength(Strong) indicator* 25 LAN1 / Wireless LAN Signal Strength(Normal) indicator* 26 LAN2 / Wireless LAN Signal Strength(Weak) indicator* 27 DC IN terminal8 LAN2 terminal9 LAN1 terminal10 RESET buttonUse a paper clip or similar to press this buttonwhen this unit is not working correctly, forexample.11 LINK / LEVEL buttonThe function varies depending on the length oftime it is pressed or pressed and held.≥Press and hold for about 3 to 6 seconds toconnect to a 2.4 GHz network.≥Press and hold for more than about 6 seconds toconnect to a 5 GHz network.≥Press for a very short time (less than about1 second) to check the strengh of signalreceived from the wireless broadband router.*1 Lights up or flashes when the correspondingfunction is in operation.*2 Indicates the wireless LAN signal strength of thewireless broadband router.≥ When this unit is not working correctly, disconnectand reconnect the AC adaptor first.If the problem persists, press and hold the [RESET]button with a paper clip or similar object for at least5 seconds until the LINK indicator lights up, and thenrelease the button.This symbol indicatesseparate collection of wasteelectrical and electronicequipment.More detailed information iscontained in “OperatingInstructions ”.Declaration of Conformity (DoC)Hereby, “Panasonic Corporation” declares that this product isin compliance with the essential requirements and otherrelevant provisions of Directive 1999/5/EC.Customers can download a copy of the original DoC to ourR&TTE products from our DoC server:http://www.doc.panasonic.deContact to Authorised Representative:Panasonic Marketing Europe GmbH, Panasonic TestingCentre, Winsbergring 15, 22525 Hamburg, GermanyThis product is in compliance with the radio standards of thefollowing countries.GB, DE, AT, BE, DK, SE, FR, IT, ES, NL, FI, GR, PT, PL, HU,CZ, SK, EE, LV, LT, SI, BG, RO, MT, CY, IE, LU, HR, NO, CH,IS, LI, TRThe WLAN feature of this product shall exclusively be usedinside buildings.This product on purpose to connect to access point of2.4 GHz or 5 GHz WLAN.Product Identification Marking is located on the bottom of theunit.111111SH-WL40-TQBM0010_mst.book 3 ページ２０１６年１１月２９日火曜日午後６時２０分