Panasonic SH-WL40 Operating Instructions Manual

Contents

4 TQBM0010Specifications∫ WIRELESS LAN SECTION∫ TERMINALS SECTION∫ ACCESSORIES SECTION∫ GENERAL*1 When wireless LAN network activated (5 GHz or2.4 GHz), and LAN terminals disconnected.*2 When wireless LAN network activated (5 GHz or2.4 GHz), and LAN terminals connected.≥ Specifications are subject to change without notice.Connections and Settings1 Connect the DC cable to the ACadaptor.A DC cable (supplied)Check the directions of the connectors, and plugthem straight in or unplug them straight out.(Otherwise the connectors may bend out of shape,which may cause malfunction.)B AC adaptor (supplied)Do not use any other AC adaptors except thesupplied one.C To a household mains socketAfter connecting, check that indicators lightup as follows:1 The POWER indicator lights up.2 The 5 G and 2.4 G indicators lights up. (It takesabout 1 minute until this indicator lights up.)2 Pair with the wireless broadbandrouter.PreparationFix to W52 if the wireless broadband routersupports W52, W53, and W56. (For how to fix,refer to the operating instructions for thewireless broadband router)1 Press the pairing button on the wirelessbroadband router.≥ For details about pairing operations, refer tothe operating instructions for the wirelessbroadband router.2 Select 2.4 GHz or 5 GHz to connect to anetwork.jTo connect to a 2.4 GHz network:Press and hold the [jLINK/-LEVEL] buttonfor about 3 to 6 seconds.jTo connect to a 5 GHz network:Press and hold the [jLINK/-LEVEL] buttonfor more than about 6 seconds.Stop pressing and holding the button whenthe LINK indicator flashes once.Pressing and holding the [jLINK/-LEVEL]button will cause the LINK indicator to light up.When you stop pressing and holding thebutton, the LINK indicator will flash and the unitwill start connecting to the network of theselected frequency band.When the LINK indicator lights off and thePOWER indicator and the 5 G or 2.4 Gindicator light up, the connection is complete.WLAN Standard IEEE802.11a/b/g/nFrequency band 2.4 GHz band5 GHz bandChannel 2.4 GHz 1 to 13 ch5 GHz W52: 36 ch, 40 ch, 44 ch, 48 chLAN port 210 Base-T/100 Base-TXDC IN 5 V 1.8 AAC Adaptor AC 110 V to 240 V, 50 Hz/60 Hz, 0.25 ADC Cable 1.2 m (USB A to DC plug)Power consumption Approx. 3.0 WPower consumption in“Network standbymode” *1Approx. 2.3 WPower consumption in“Network standbymode”*2Approx. 2.5 WDimensions (WkHkD) Approx.100.0 mmk23.0 mmk67.2 mmMass Approx. 81.0 gOperating temperaturerange0 o C to r40 o COperating humidity range 10 % to 80 % RH(no condensation) SH-WL40-TQBM0010_mst.book 4 ページ２０１６年１１月２９日火曜日午後６時２０分