Panasonic SL-S355 Operating Instructions Manual

Also see for SLS355 - PORT. COMPACT DISC: Operating instructions Operating instructions Operating instructions

Contents

Other Play MethodsSkip playThe disc plays from the specific track through to theend, then play stops automatically.Preparation: Put unit in stop mode.12 Select the desired track.3Random play12For your reference:≥It is also possible to press [9] while the unit is instop status to change the first track to be played. (Alltracks are played eventually, regardless of which isplayed first.)≥Program play is not possible in the random mode.Resume playThis function allows you to listen from the beginning ofthe track where play stopped because the unit waspowered off (or switched to stop status). It is usefulwhen listening to CDs in the car, etc.For your reference:≥If the [RESUME, NORMAL, RANDOM (play mode)]slider is put in the [RESUME] position, the all-repeat function will be activated automatically as soonas the unit is powered on.≥If power is cut off near the end of a track (power offstatus), playback may resume from the beginning ofthe next track.≥If the unit is powered off while a disc was playing andthen a new disc is inserted, play will begin from themiddle of the new disc because the unit remembersthe position where play stopped on the previous disc.ReleaseReleaseThe letters such as A in the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2).Program playUp to 24 tracks can be entered in the programmed se-quence.Preparation: Put unit in stop mode.12 Select the desired track.3 Register in sequence.(The indication “M” and the programmed se-quence appear on the display panel.)4 Repeat steps 2 and 3 to program allthe desired tracks.5∫ To program the same track in the se-quence more than once∫ After step 3, press [MEMORY/RECALL] the desirednumber of times.∫ If “'” is displayed∫ No more tracks can be programmed.∫ To confirm the contents of the program∫ Press [MEMORY/RECALL] while the disc is playing.(The number of the programmed tracks appear onthe display panel in sequence.)∫ To delete the entire programmed se-quence∫ Press [∫, POWER OFF].Repeat functionPress during play or stop mode.The setting is switched in the sequence indicated beloweach time [REP] is pressed.1-track repeat (1 `)( ----------------]One track is repeated. |; |All-track repeat (ALL `) |All the tracks on the disc are repeated. |; |Cancel ------------------------------------------------}For your reference:If [REP] is pressed during program play, only the tracksin the program are repeated.(The indication “ALL” is not displayed.)Changing the sound qualityPress during play or stop mode.The setting switches in the sequence indicated beloweach time [S-XBS] pressed.S-XBS>Normal (No indicator is shown.)^========bS-XBS:Select this setting to boost the low-range response.4RESUME RANDOMLNORMALA: 9651;DNORMALRESUMELRANDOM1;DRESUME RANDOMLNORMALNORMALRANDOMLRESUMERESUME RANDOMLNORMALRESUME RANDOMLNORMALA: 965FMEMORY/RECALL1;DREPEJ S-XBSB S-XBS