Panasonic SL-SW940S Operating Instructions Manual

Contents

P PCBefore requesting service, make the following checks. If you are in doubt about some of the checkpoints, or if the remedies indicated in the chart do not solve the problem:In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mailconsumerproducts@panasonic.com, or the website (http://www.panasonic.com).In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit thewebsite (www.panasonic.ca), or an authorized Servicentre close to you.Troubleshooting guideNo sound or there isa lot of noise.No play.≥The HOLD function is on (➪abobe).≥The disc isn’t correctly set.≥The disc is scratched or dirty.(Tracks skipped.)≥There is moisture on the lens. Wait for about an hour and then try again.≥The lens is dirty: clean it with a blower (recommendedproduct: SZZP1038C).If the lens gets marked withfingerprints, gently wipe them off with a cotton swab.≥Ensure the plugs are inserted firmly.≥Wipe the plugs clean with a clean cloth.≥The elapsed playing time disappears and sound is interruptedif bumps continue repeatedly.≥Separate this unit from mobile telephones.Play doesn’t resumefrom the track whereplay stopped at.≥This doesn’t work if you open the lid while the unit is in the stop mode.≥This doesn’t work during random play.≥It may not work correctly under some conditions.Play doesn’t startfrom the first track.≥Random play modes may be on (➪page 4).≥Play resumes from the track where you last stopped play or powerwas cut off (play may start from a different track if you change discsafter power is cut off). Use skip to return to the first track.≥This may occur after the first time you recharge the batteries or after you haven’tused them for a long time. Play time should be restored after a few recharges.≥The batteries can go flat if you leave the AC adaptorconnected after recharging is complete.≥The indicator does not appear when the AC adaptor is connected.≥The indicator does not appear correctly under some conditions.Play time is shortafter recharging.The battery indicator failsto appear or is incorrect.Play time is very shorteven after recharging.The batteries have reached the end of their service life. Usuallythey can be recharged 300 times.1The unit stops working. Disconnect then reconnect all power sources (batteries and AC adaptor).This manual was printed with soy based ink.Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.caC 2003 Matsushita Electric Industrial Co., Ltd.Printed in JapanRQT6781-PF0103KN1023Display( The HOLD function is on (➪above).) ≥You haven’t inserted a disc or it isn’t inserted correctly.≥You have inserted a disc this unit cannot play.* The disc lid is open.' Full: The program already contains 20 tracks.Panasonic Consumer Electronics Company,Division of Matsushita Electric Corporation of AmericaOne Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.comPanasonic Sales Company,Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985pDear CustomerThank you for purchasing this product. Before connecting, operating oradjusting this product, please read these instructions completely. Pleasesave this manual for future reference.The model number and serialnumber of this product can befound on either the back or thebottom of the unit.Please note them in the spaceprovided below and keep forfuture reference.MODEL NUMBERSERIAL NUMBERPortable CD playerOperating InstructionsModel No.SL-SW940SL-SW941CHOLDThis function causes the unit to ignore accidental button presses.Set to HOLD so the unit doesn’t power on accidentally or play is interrupted.Note on CD-R and CD-RWThis unit can play CD-DA format audio CD-R and CD-RW that have beenfinalized§ upon completion of recording. It may not be able to play someCD-R or CD-RW due to the condition of the recording.§Finalizing is a process that enables CD-R/CD-RW players to play audioCD-R and CD-RW.Resume functionThe player stores the track where you stopped play or power was cut off.Opening the lid when the unit is in stop mode cancels the function.Auto power off functionIf the unit is left in stop mode for approximately 10 minutes, the unit powersitself off automatically.AudioNo. of channels:2 (left and right, stereo)Frequency response:20 to 20,000 Hz(i0 dB to j7 dB)DA converter: 1 bit, MASHHeadphone output level:RMS max. 6 mWi6 mW/16 ≠ (adjustable)PickupLight source: Semiconductor laserWavelength: 780 nmGeneralPower supply:DC input (via optional AC adaptor):DC 4.5 VOperational temperature range:0 eC–40 eC(32 eF–104 eF)Rechargeable temperature range:5 eC–40 eC(41 eF–104 eF)Play time:[Approximate operating time in hours(in hold mode with EQ canceled, at 25eC (77 eF) on a flat, stable surface)]Recharging time: About 6 hours≥The play time may be less dependingon the operating conditions.≥Play time will be considerablyreduced when playing CD-RW.Dimensions (WaHaD):142a29.7a142 mm(59 /16za1 3/16za5 9/16z)Mass: 320 g (11.3 oz.)(with batteries)280 g (9.9 oz.)(without batteries)Note:Specifications are subject to changewithout notice.Mass and dimensions are approximate.SpecificationsThis is normal.≥You aren’t using the special rechargeable batteries (➪page 3).≥You must insert two batteries before you can recharge them.≥The unit must be off before you can recharge.Cannot recharge.The AC adaptor becomeswarm during recharging.The battery indicator scrolls for about 6 hours regardless of theamount of charge left in the battery.The battery indicator continues toscrool even if sufficiently charged.Batteriesused2 optionalalkaline batteries2 optional rechargeablebatteriesPlay time3315

/ 4

Related manuals for Panasonic SL-SW940