4144-5-5 Providing an ID to the CameraThe camera ID is specified through the screen.The ID can include up to 10 alphanumeric characters, symbols,and/or spaces.When the settings menu is displayed, outputting color barsignals does not indicate the camera ID.1 Go to the ID> screen from the CAMOPERATION page.2 Turn the JOG dial button to move the cursor to options[ID1:] - [ID3:].3 Press the JOG dial button. The cursor moves to the IDentry area, allowing you to enter an ID.4 Turn the JOG dial button until a desired character appears.The characters that appear are switched in the followingorder:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -5 Press the JOG dial button to accept a desired character.6 Turn the JOG dial button to move cursor to the next digit(clockwise), and repeat Steps 4 - 5 to set characters.7 When all the characters are set, turn the JOG dial button tomove the cursor to [:].8 Pressing the JOG dial button brings the cursor back to theoptions [ID1:] - [ID3:].9 To exit the menu, press the MENU button.The settings menu disappears and the status of the AJ-SPX900E is indicated at the top and bottom of theviewfinder screen.When the menu option CAMERA ID is set to “BAR”, thecamera ID is recorded together with color bar signals.This menu option is accessible from the INDICATOR1> screen, which is accessible from the VFpage.4-5-6 Setting UMID InformationThe AJ-SPX900E supports UMID metadata. You need to specifyas UMID information the country where you live (using up tothree characters), organisation or company (up to fourcharacters) and user name (up to four characters). For thecountry name, you must use abbreviations prescribed in theISO3166 Country Code*1.Here are some examples of the correct method for specifying auser name:*1 Examples: China CHNU.S.A. USACanada CANJapan JPN1 Go to the INFO> screen from the MAINOPERATION page.2 Turn the JOG dial button to move the cursor to the option[USER].3 Press the JOG dial button. The cursor moves to the userentry area, allowing you to enter a user name.4 Turn the JOG dial button until a desired character appears.The characters appear in the following order:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -The COUNTRY entry can only include alphabeticalcharacters and spaces.5 Press the JOG dial button to accept a desired character.6 Turn the JOG dial button to move the cursor to the next digit(clockwise), and repeat Steps 4 to 5 to set characters.7 When the last character is set, press the JOG dial button tobring the cursor back to the option [USER].8 To exit the menu, press the MENU button. &$0(5$,'!,' $%&'()*+,-,' $%&'()*+,-,' $%&'()*+,- 80,'6(7,1)2!2:1(5&28175< 25*$1,=$7,21 86(5 '(9,&(12'(
