988-3-8 SKIN TONE DTL 8-3-9 KNEE/LEVELThe items indicated by are the setting items for PAINT MENUSW() R/W in the screen. The itemswithout are the setting items for PAINT MENU LEVEL R/W.Please refer to [8-7-2 SD CARD R/W SELECT] for moreinformation.The ____ in the Adjustable Range column indicates the presetmode.Items/Data SavedAdjustableRange RemarksSKIN TONEDTLONOFFSet the skin tone DTL to ON or OFF.S C U F ESKIN TONEZEBRAONOFFON/OFF switching for ZEBRA within theSKIN TONE range.S C U F ESKIN DTLCORING0:5:7Adjust the effect of SKIN TONE DTCCORING.S C U F ESKIN TONEGETUsed when obtaining the target hue forSKIN TONE DTL. Align the center markerand the target object with each other.– – – – –Y MAX 000:190:255Set the maximum value of the brightnesssignal to which SKIN TONE effect isenabled.S C U F EY MIN 000:010:255Set the minimum value of the brightnesssignal to which the SKIN TONE effect isenabled.S C U F EI CENTER 000:022:255Set the center position on the I axis (thearea where SKIN TONE is enabled).S C U F EI WIDTH 000:010:255Set the area width where SKIN TONE isenabled along the I axis above and belowthe I CENTER.S C U F EQ WIDTH 000:005:255Set the area width where SKIN TONE isenabled along the Q axis above and belowthe I CENTER.S C U F EQ PHASE –128:+000:+127Set the phase in the area where SKIN TONEis enabled based on the Q axis.S C U F ER-YB-YQ-WIDTHI-WIDTHQ-PHASEI-CENTERYY-MAXY-MIN0+ direction= SKIN TONE AREAItems/Data SavedAdjustableRange RemarksMASTER PED –200:+020:+200Set the master pedestal.S C U F EMANUALKNEEONOFFSet the mode when the AUTO KNEE switchis OFF. The KNEE POINT/SLOPE set valueis enabled when this setting is ON.S C U F EKNEE POINT 70.0%:85.0%:107.0%Set the KNEE POINT position in 0.5% steps.S C U F EKNEE SLOPE 00:50:99 (98)Set the KNEE SLOPE.0 setting is equal to KNEE OFF.The adjustable range when using the AJ-EC3E is from 00 to 98.S C U F EWHITE CLIP ONOFFSet the WHITE CLIP feature to ON or OFF.The WHITE CLIP LVL set value is enabledwhen this setting is ON.S C U F EWHITE CLIPLVL90%:105%:109%Set WHITE CLIP LEVEL.S C U F EA.KNEE POINT 80%:85%:107%Set the AUTO KNEE POINT position in0.5% steps. This setting is enabled when theOUTPUT/AUTO KNEE selector switch is setto CAM.AUTO KNEE ON.S C U F EA.KNEE LVL 100:105:109Set the AUTO KNEE LEVEL.S C U F EA.KNEERESPONSE1:4Set the AUTO KNEE response speed.The smaller the setting value, the faster theresponse speed.S C U F E– direction
